1st Gen CRX Clutch setup. Need help?
#1
1st Gen CRX Clutch setup. Need help?
Hi. I got an 86 CRX Si.I have a brown valve cover DOHC ZC installed in it.I decided to go IHI RHB5 turbo.I'm still in the process of completing it. My problem is, I decided to put an 8.5lbs flywheel from ACT. And you know you have to upgrade to a bigger clutch right.But in my case, I have to mix and match my parts cause the disc from a 91 CRX SI wont't work. I used the one from an 88 Accord. As for my pressure plate, that's where my poblems at. I used the one from the 91 CRX SI, And the plate hits inside my tranny. My question is: WHAT PRESSURE PLATE CAN I USE WITH THIS SETUP? I grinded the plate down a little to clear the spot where it hit my tranny( along the edges of the plate). But I feel it's not gonna work.CRAZY SWAP HUH? ANY HELP GREATLY APPRECIATED!!!!!
#3
Re:1st Gen CRX Clutch setup. Need help?
Originally Posted by used2baracer
I've seen this before... you gotta grind the spot on the tranny down where it hits... you should be fine...
#4
Re:1st Gen CRX Clutch setup. Need help?
Originally Posted by used2baracer
I've seen this before... you gotta grind the spot on the tranny down where it hits... you should be fine...
Thread
Thread Starter
Forum
Replies
Last Post
Semnos
Hybrid/Tech
4
07-31-2004 12:20 PM