white smoke ! help
#1
white smoke ! help
i just made my Down pipe and thier alots of white smoke coming out of my muffler befored the down pipe was install this never happen what the meaning of this blew head gasket ? help me out !!! thank
#6
Re:white smoke ! help
I'd check your downpipe for oil. If you're burning metal thats not a good sign.
Right before my first motor blew up it was burning white smoke. I ignored it thinking I was burning oil, and about an hour later I spun a bearing. One of the pistons had lost its balance and parts of the valve were starting to bond with the piston when it rose up because of the immense amount of heat (there was damage to the piston surface giving me this indicator).
If you're hearing detonation, or anything sounds a little off you need to sorely examine everything.
It is most likely oil if there are no "odd" sounds. But just to be safe I would check the downpipe and turbo to see if oil is leaking from those. You may also want to monitor the oil pressure.
Right before my first motor blew up it was burning white smoke. I ignored it thinking I was burning oil, and about an hour later I spun a bearing. One of the pistons had lost its balance and parts of the valve were starting to bond with the piston when it rose up because of the immense amount of heat (there was damage to the piston surface giving me this indicator).
If you're hearing detonation, or anything sounds a little off you need to sorely examine everything.
It is most likely oil if there are no "odd" sounds. But just to be safe I would check the downpipe and turbo to see if oil is leaking from those. You may also want to monitor the oil pressure.
#9
Re:white smoke ! help
yeah i check the DP and i see some oil spot on the DP and thier also oil in the charge pipe so i guess my seal are blow ?damn this suck so much ---- happen and no i don't use a CAT also how loud is detonation can you hear it while driving ? any tip on how to fix it would be great !!!
#10
Re:white smoke ! help
Detonation can be heard from the cabin. It sounds like tapping on the valve cover, or when I experienced it it sounded more like when you take a hose at full power and bend the neck of it at about a 60 degree angle. That sound is almost identical.
Think about it, detonation results in the cylinder rods shaking, so you hear them tapping. Sometimes it may get so bad that you can also hear the valves tapping.
Think about it, detonation results in the cylinder rods shaking, so you hear them tapping. Sometimes it may get so bad that you can also hear the valves tapping.