Tell me if i scored or not
#1
Tell me if i scored or not
I traded a z6 head for these .
There pauter rods with arp bolts the kid had no idea what he had. .
The Pin dia is .748"
B.E. Bore is 1.890"
length is 5.394"
B E width is .892"
Weight is 500g
I run a d16a6 with 14b/hf manifold 450cc injectors 255 fuel pump and turboedit. My question is what pistons / Compression ratio should I go with. I do daily drive the car also.
There pauter rods with arp bolts the kid had no idea what he had. .
The Pin dia is .748"
B.E. Bore is 1.890"
length is 5.394"
B E width is .892"
Weight is 500g
I run a d16a6 with 14b/hf manifold 450cc injectors 255 fuel pump and turboedit. My question is what pistons / Compression ratio should I go with. I do daily drive the car also.
#8
Re: Tell me if i scored or not
Originally Posted by Stealthmode
In the second pic the small end of the rod looks notched. WTF is that?
#9
Re: Tell me if i scored or not
Originally Posted by Stealthmode
In the second pic the small end of the rod looks notched. WTF is that?
If the machine shop says those rods are happy... good job. SOHC VTEC head/intake goes $100 all day long this neck of the woods.