stripped turbine housing bolts - drilled out, now what
#1
stripped turbine housing bolts - drilled out, now what
4/5 bolts snapped off in my downpipe side of my t3, i drilled them out but pretty much took the threads with em,
would it be best to try and re tap and new bolts, or re tap and get studs, and try to seal the studs in some how permanently?
would it be best to try and re tap and new bolts, or re tap and get studs, and try to seal the studs in some how permanently?
#2
Re: stripped turbine housing bolts - drilled out, now what
1) Re-tap
2) Grade 8 Studs, Nuts, Lock Washers
3) High-Temp (blue?) Loc-tite
Sorry that happened to you; however, studs MAY not work because placement of the turbo. I.E. You may not be able to slide the DP over the studs due to tight/awkward location in the engine bay. Check that out first so you're not cussing yourself (and me) in the near future.
JP
2) Grade 8 Studs, Nuts, Lock Washers
3) High-Temp (blue?) Loc-tite
Sorry that happened to you; however, studs MAY not work because placement of the turbo. I.E. You may not be able to slide the DP over the studs due to tight/awkward location in the engine bay. Check that out first so you're not cussing yourself (and me) in the near future.
JP
#3
Re: stripped turbine housing bolts - drilled out, now what
thats what i was thinking, maybe 4 studs and 1 bolt or somthin, i just dont know how strong re tapped threads are gona be thats why i thought maybe sealing studs in somehow would be a better idea
#9
Re: stripped turbine housing bolts - drilled out, now what
Originally Posted by samson
? I thought that stuff was like a gasket sealent not a thread locker.
JP
Originally Posted by jagojon3
It is, he's just an idiot.
Now swallow your tounge sweetheart.
#10
Re: stripped turbine housing bolts - drilled out, now what
Originally Posted by samson
1) Re-tap
2) Grade 8 Studs, Nuts, Lock Washers
3) High-Temp (blue?) Loc-tite
Sorry that happened to you; however, studs MAY not work because placement of the turbo. I.E. You may not be able to slide the DP over the studs due to tight/awkward location in the engine bay. Check that out first so you're not cussing yourself (and me) in the near future.
JP
2) Grade 8 Studs, Nuts, Lock Washers
3) High-Temp (blue?) Loc-tite
Sorry that happened to you; however, studs MAY not work because placement of the turbo. I.E. You may not be able to slide the DP over the studs due to tight/awkward location in the engine bay. Check that out first so you're not cussing yourself (and me) in the near future.
JP