Re:starting turbo install. & rings/bearings :)
bah looks like ---- i need to do some more adjustamakating
https://www.homemadeturbo.com/jbliss...r_mounted3.jpg |
Re:starting turbo install. & rings/bearings :)
bah looks better. only two bolts holding bumper on. when its all tight you won't be able to see the bottom of the intercooler. looks straight though
https://www.homemadeturbo.com/jbliss...r_mounted4.jpg https://www.homemadeturbo.com/jbliss...r_mounted6.jpg https://www.homemadeturbo.com/jbliss...r_mounted7.jpg |
Re:starting turbo install. & rings/bearings :)
Looks good man. Thats going to be awsome to drive.
|
Re:starting turbo install. & rings/bearings :)
should be fun, i drove my friends little old civic. like an 88 or something. with a b16a in it. it was slowwwwwwwwww.
|
Re:starting turbo install. & rings/bearings :)
I know this guy with an 89 hf rex with b16 swap and his best 1/4 mile is a 15.2... talk about slow... b16 hf rex should be low 14's common.....
The b16 just wants to breath.. maybe that's what it is. btw, it looks good man.. the intercooler is sweet. |
Re:starting turbo install. & rings/bearings :)
|
Re:starting turbo install. & rings/bearings :)
Originally Posted by MR_DR_PEP
I know this guy with an 89 hf rex with b16 swap and his best 1/4 mile is a 15.2... talk about slow... b16 hf rex should be low 14's common.....
The b16 just wants to breath.. maybe that's what it is. |
Re:starting turbo install. & rings/bearings :)
horray it runs. seems to run perfect.
my oil lines leaked but i got that squared away right for now it seems. i did something extremely stupid. i forgot to put a oil filter on. so i started the car... about 10 seconds later. it puked all of the oil all over my driveway. stupid me 170 170 170 170 compression the rings seem to have seated really good. just looks like regular exhaust comin out of the turbo no oil. plugs look good too. right now the car sounds like ass coming out of the turbo. kinda like beaus race car... ass j/k bo no o/2 sensor now so i get a cell. |
Re:starting turbo install. & rings/bearings :)
that camera seams to do better in the light. i like the IC and the manifold! nice work! how fast is she? did ytou rehone the block?
|
Re:starting turbo install. & rings/bearings :)
i honed the cyclinders real good. its really slow right now. no 02 sensor and the exhaust is just coming out of the turbo. i'm kinda worried casue i ran it for a couple mins with all the oil drained out of it. cause i forgot to put a oil filter on and it all went out the hole onto the gorund and i didn't notice it for a couple mins. but i think its fine. it was 50 weight if thats make a diff :P
|
All times are GMT -5. The time now is 01:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands