HomemadeTurbo - DIY Turbo Forum

General Discussion Off-Topic Discussion and Enlightenment

starting turbo install. & rings/bearings :)

Thread Tools
 
Search this Thread
 
Old 08-07-2003, 02:41 AM
  #1  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default starting turbo install. & rings/bearings :)
bah my camera sucks i already know.

step 1. nector




probably should replace this...?




always worthless




hard to see but a ring is pintched here on the #3 cyclinder. d'oh





J-SMITH69 is offline  
Reply
Old 08-07-2003, 05:56 AM
  #2  
3.0 BAR
 
leed's Avatar
 
Join Date: Dec 2002
Posts: 3,830
Default Re:starting turbo install. & rings/bearings :)
Lets all pitch in to step Johnny up to a 1980's camera.
leed is offline  
Reply
Old 08-07-2003, 03:38 PM
  #3  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:starting turbo install. & rings/bearings :)
old skool
J-SMITH69 is offline  
Reply
Old 08-07-2003, 07:34 PM
  #4  
3.0 BAR
 
OnYx's Avatar
 
Join Date: Nov 2004
Posts: 5,101
Default Re:starting turbo install. & rings/bearings :)
go to a pawn shop and get a decent camera theyr not that expensive.
OnYx is offline  
Reply
Old 08-07-2003, 09:42 PM
  #5  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:starting turbo install. & rings/bearings :)
well none of the rings were pintched. but ALL the oil rings where shitty. like they didn't move. all the bearings so good. so i'm just gunna throw rings and go wohoo
J-SMITH69 is offline  
Reply
Old 08-07-2003, 11:24 PM
  #6  
1.5 BAR
 
MR_DR_PEP's Avatar
 
Join Date: Dec 2002
Location: Nashville
Posts: 807
Default Re:starting turbo install. & rings/bearings :)
cool... what type of turbo setup are you doing?
MR_DR_PEP is offline  
Reply
Old 08-08-2003, 01:15 AM
  #7  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:starting turbo install. & rings/bearings :)
.48/.42 turbo
1st gen beau manifold
btm
tyrus intercooler
probe bov
JR adjustable fmu
J-SMITH69 is offline  
Reply
Old 08-09-2003, 12:49 AM
  #8  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:starting turbo install. & rings/bearings :)




tyrus's intercoolers are so sexy. but hard to find room for lol. but i had some luck with my air compressor and circle grinder with a cuttin disc... copped up a lot of ----. had to make holes for pipes. good ol zip ties holdin her down now.
J-SMITH69 is offline  
Reply
Old 08-09-2003, 01:49 PM
  #9  
3.0 BAR
 
OnYx's Avatar
 
Join Date: Nov 2004
Posts: 5,101
Default Re:starting turbo install. & rings/bearings :)
LMAO you left the passanger headlight on!! LOL
OnYx is offline  
Reply
Old 08-09-2003, 02:34 PM
  #10  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re:starting turbo install. & rings/bearings :)
yeah its off now... but it was a toughone to get to the bumper bolts without moving the headlight. but i did it
J-SMITH69 is offline  
Reply



Advanced Search
Quick Reply: starting turbo install. & rings/bearings :)


Reply Closed Thread Share

All times are GMT -5. The time now is 02:42 AM.