Some parts to install this weekend.... (pics of course)
#1
Some parts to install this weekend.... (pics of course)
Well guys I thought I'd make a post because I"m bored.... I'll let everyone know how this system works out when I get it all setup.
The Greddy Rebic III and Simulator.... this will be the controller for the sub injector system.
The injector driver, pressure sensor and dropping register for the rebic system
The harnesses....
The injector holder/boss I'm using. Its really nice, has a mini fuel rail setup and everything. It better be nice for $65
Whats the difference between these two injectors..... Oh they may look the same but one is a stock z24/gt injector.... the other is an msd 96# injector. They are identical excluding the pintle holes which are huge on the msd compared to the stocker.
Anyways this should all be setup this weekend and possibly some higher boost levels if it all works out. I used one big injector because it was cheaper going that route opposed to buying another expensive injector holder.
Anyways hopefully this works...again Die FMU DIE DIE DIE I should be able to swap back to my stock injectors with this setup too so the car will run better off boost.
The Greddy Rebic III and Simulator.... this will be the controller for the sub injector system.
The injector driver, pressure sensor and dropping register for the rebic system
The harnesses....
The injector holder/boss I'm using. Its really nice, has a mini fuel rail setup and everything. It better be nice for $65
Whats the difference between these two injectors..... Oh they may look the same but one is a stock z24/gt injector.... the other is an msd 96# injector. They are identical excluding the pintle holes which are huge on the msd compared to the stocker.
Anyways this should all be setup this weekend and possibly some higher boost levels if it all works out. I used one big injector because it was cheaper going that route opposed to buying another expensive injector holder.
Anyways hopefully this works...again Die FMU DIE DIE DIE I should be able to swap back to my stock injectors with this setup too so the car will run better off boost.
#2
Re:Some parts to install this weekend.... (pics of course)
wow, looks like you dropped some change. I need to get some bolts so I can put my engine on my engine stand then I'll be a picture ----- just like you. anybody know what thread the bolts are on the tranny side of the engine on a b18?
#4
Re:Some parts to install this weekend.... (pics of course)
Originally Posted by kyle
wow, looks like you dropped some change. I need to get some bolts so I can put my engine on my engine stand then I'll be a picture ----- just like you. anybody know what thread the bolts are on the tranny side of the engine on a b18?
#5
Re:Some parts to install this weekend.... (pics of course)
im pretty sure its a fine thread as well. i forget the exact specs of it tho. if this was a week earlier (or sometime later after i find a new block ) i could let u know
airtonics, looks like some good stuff man, cant wait to hear how it works
airtonics, looks like some good stuff man, cant wait to hear how it works
#6
Re:Some parts to install this weekend.... (pics of course)
problem is all the tranny bolts I have are holding my tranny onto my engine in my car. the ls block isn't too heavy, I might just carry that ---- into carquest and be all, I need a bolt yay long that fits that ----, get on it.
#7
Re:Some parts to install this weekend.... (pics of course)
Originally Posted by kyle
problem is all the tranny bolts I have are holding my tranny onto my engine in my car. the ls block isn't too heavy, I might just carry that ---- into carquest and be all, I need a bolt yay long that fits that ----, get on it.
#8
Re:Some parts to install this weekend.... (pics of course)
Thanks for jacking my thread
Anyways yeah this setup was more costly than I had planned but oh well.... hopefully it will all be worth it. I just started tinkering with the electronics after getting back from my pre-employment drug test with state farm. Hopefully this beast is all setup today
Did I hear someone say 10psi with no timing retard? hehehe
Anyways yeah this setup was more costly than I had planned but oh well.... hopefully it will all be worth it. I just started tinkering with the electronics after getting back from my pre-employment drug test with state farm. Hopefully this beast is all setup today
Did I hear someone say 10psi with no timing retard? hehehe