HomemadeTurbo - DIY Turbo Forum
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Rings and bearings... (https://www.homemadeturbo.com/general-discussion-6/rings-bearings-27592/)

HMT-Admin 10-06-2004 02:05 PM
Re:Rings and bearings...
 
I never tank any of my blocks, Mainly because they really dont come out that clean. That "aluminum safe" cleaner most machine shops uses is pretty weak. What I do to clean all my blocks is, strip it all the way down, go buy some Castrol super clean and just spray that ---- all over the block, all the passages every crevise etc etc, let it sit for a bit and I use the steam cleaner at work to blow it all off. I swear to god you can practically eat off these things when I'm done with it.

turboboy 10-06-2004 02:23 PM
Re:Rings and bearings...
 
i gave up on cleaning anything on cars after road salt attacked my pretty new motor last winter :-\

HMT-Admin 10-06-2004 02:24 PM
Re:Rings and bearings...
 
Originally Posted by ghettoturbo
i gave up on cleaning anything on cars after road salt attacked my pretty new motor last winter :-\
Big deal, just undercoat your block black.. That ---- holds the heat good 8)

Y-49crx 10-06-2004 02:31 PM
Re:Rings and bearings...
 
I've got some TopLine rings for the d-series for sale. Stock bore/brand new. Came with my rebuild kit and used total rings instead. Make offer.

-Joe

mahcivic 10-06-2004 04:00 PM
Re:Rings and bearings...
 
so do you guys think its possible to swap rods while the motor is still in the car. like take the pan off, head off and just undo the rods bolts and slide em out throught the top, then just put the new rods in with the pistons and put it all back together?

Turbo90Accord4DR 10-06-2004 04:04 PM
Re:Rings and bearings...
 
yep,... but why would you change rods? if one broke it probably fucked some ---- up!

Reddy 10-06-2004 04:07 PM
Re:Rings and bearings...
 
Originally Posted by mahcivic
so do you guys think its possible to swap rods while the motor is still in the car. like take the pan off, head off and just undo the rods bolts and slide em out throught the top, then just put the new rods in with the pistons and put it all back together?

We've done that many many many times on my buddy's SHO. He has 3 donor motors and we're running out of pistons we've melted soo many

HMT-Admin 10-06-2004 04:15 PM
Re:Rings and bearings...
 
Originally Posted by mahcivic
so do you guys think its possible to swap rods while the motor is still in the car. like take the pan off, head off and just undo the rods bolts and slide em out throught the top, then just put the new rods in with the pistons and put it all back together?
Yup incar rebuilds are really easy on hondas. Just dont wait until its to late, because if a rod breaks in single cam its complete destruction. I had a rod go through the main girdle, through the pan, and all the way into my downpipe, the other chunks went through the front of the block. ;)

mahcivic 10-06-2004 06:09 PM
Re:Rings and bearings...
 
im not gonna wait till a rod breaks. im either gonna get a set of rods that doesnt require notching so i can jsut drop the pan, remove head and wam bam im done. or im gonna buy a set of ls rods and give machine shop my extra block and crank and machine them so they fit. i just dont want to have to take the motor completely out again. cool that makes me happy :P


All times are GMT -5. The time now is 08:11 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands