HomemadeTurbo - DIY Turbo Forum
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   ringlands owned,racing tonight (https://www.homemadeturbo.com/general-discussion-6/ringlands-owned-racing-tonight-40862/)

Koby 06-09-2005 03:34 AM
Re: ringlands owned,racing tonight
 
Running 13's on 116mph traps?



:o :o :o :o WTF SHITTY DRIVER

You should be running solid 12.00's or 11.90's with those kind of traps.

J-SMITH69 06-09-2005 03:36 AM
Re: ringlands owned,racing tonight
 
Originally Posted by Joseph Davis
Less compression at the 4-500 rpms the starter turns your engine at? Sure does!

Less compression at 4000 rpms with viscous oil filling up the .001" clearances in the ringland area? Where's your wallet, son? I want to make a bet...
if the oil is holding all the compression in then why does it blow out the exhaust, and out the valve cover breather... lol

when my ringlands were jacked up, i was blowing oil out of the exhaust, out of the valve cover breather, pushing oil up my oil return into the turbo making it smoke too.

leed 06-09-2005 03:45 AM
Re: ringlands owned,racing tonight
 
Whenever I taco'd some ringlands it would still haul ass. Lay a huge K-car smoke screen, yes, but still haul ass.

Id be more concerned about the dramatically lowered knock threshold with all the oil in the chamber. But ---- it, the ringlands are already done, right? hahaha

ghettoturbo 06-09-2005 12:24 PM
Re: ringlands owned,racing tonight
 
drove mine about 3 hours after i toasted all four pistons...a few of the bores had a mark from where the cracks were in the ringlands, so be prepared to go to town with the hone

mycrx 06-09-2005 02:34 PM
Re: ringlands owned,racing tonight
 
ya its nuts on my buddys b16 motor, it blew all 4 pistons only on 9psi from a t3 .48/.42 tuned on crome, i duno leed i think u should plug in that chip and we'll see wtf is wrong with it.

FooK 06-09-2005 09:04 PM
Re: ringlands owned,racing tonight
 
Originally Posted by mycrx
ya its nuts on my buddys b16 motor, it blew all 4 pistons only on 9psi from a t3 .48/.42 tuned on crome, i duno leed i think u should plug in that chip and we'll see wtf is wrong with it.
how is that gonna show anything. dave has more displacement and no two setups are the same. he'd probably run ass lean on that chip.

90crxhybrid 06-09-2005 11:05 PM
Re: ringlands owned,racing tonight
 
wow fook are you that ------ stupid...load up the chip on the computer and look at it see how well of a tune it was.

KOBY

he is a damn good driver cant get traction even with drag radials tell 3rd gear just spins off the line

FooK 06-09-2005 11:20 PM
Re: ringlands owned,racing tonight
 
Originally Posted by 90crxhybrid
wow fook are you that ------ stupid...load up the chip on the computer and look at it see how well of a tune it was.

KOBY

he is a damn good driver cant get traction even with drag radials tell 3rd gear just spins off the line
apparently not as stupid as you.

without datalogs, how is he gonna have any idea how good the tune was? use his extra sensory perception to guess the air/fuel ratios?

ps - on drag radials making 276whp, those times are ----.

RedCavz 06-09-2005 11:29 PM
Re: ringlands owned,racing tonight
 
Originally Posted by FooK
Originally Posted by 90crxhybrid

ps - on drag radials making 276whp, those times are ---- ---- ---- ---- ---- ----.
hes a good driver? thats even worse..

90crxhybrid 06-09-2005 11:45 PM
Re: ringlands owned,racing tonight
 
fook what did yur car run again? lol o yea btw he ran a 13.2 on 50 dollar les schwab tires


All times are GMT -5. The time now is 09:55 PM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands