Redyno'd ehhh.... :(
#1
Redyno'd ehhh.... :(
Not as expected but its hard to compare from my previous dyno b/c they where two diff dynos and the first on was uncorrected.
The first dyno was done on a DynoCom dyno
uncorrected
323whp 257trq @17psi
3rd gear pull.
DynoJet dyno
SAE Corrected
322whp 247trq @ 25psi
It was a cold and damp day but even after several attempts in 3rd gear it kept spinning so this was done in 4th gear.
Red is 3rd
blue is 4th
The torque is unusually flat though!
Setup is :
Vitara setup
t3/t4 50 trim .48 a/r
stock head
The first dyno was done on a DynoCom dyno
uncorrected
323whp 257trq @17psi
3rd gear pull.
DynoJet dyno
SAE Corrected
322whp 247trq @ 25psi
It was a cold and damp day but even after several attempts in 3rd gear it kept spinning so this was done in 4th gear.
Red is 3rd
blue is 4th
The torque is unusually flat though!
Setup is :
Vitara setup
t3/t4 50 trim .48 a/r
stock head
#3
Re: Redyno'd ehhh.... :(
I'm still running the 6psi spring in my tial and at about vtec cross over is would bounce really fast from 20 to 25psi and then settle down by about 6500rpm. weird, one more thing i got to sort out.
#6
Re: Redyno'd ehhh.... :(
Originally Posted by 88dx
I had a 6psi spring im my WG and after dave and I shimmed it, the boost would hold solid 15psi or 21psi with a Boost controller cheaper then buying a new spring
Thread
Thread Starter
Forum
Replies
Last Post