Re:projekteg = boosted!!!!!!!!!*UPDATED W/NEW PICS*
 

be careful with this piping!
[img width=300 height=300]http://www.newbieforces.com/files/3%20030.jpg[/img]
my homie did that on his integra when he hit bumps the pipes kept rubing and coming off.

ok now hurry up and turn up the boost beatch! :P

Re:projekteg = boosted!!!!!!!!!*UPDATED W/NEW PICS*
 

holy ---- renr, resize that pic :o anyways, my car isn't really that low and the piping is above the oil pan level and just a ---- hair above the tow hook, so it should be straight. that coupler off the turbo is temporary until i get a tight radius aluminum 90, none of my mandrels were tight enough :P as far as turning up the boost, i'm not gonna call anybody out, but my ------- ecu was suppose to be here this past friday and i'm pretty pissed about it b/c i have to drive my car to work, but don't like driving with no fuel management >:(

last night i took my bumper back off and checked some ----, i found my exhaust leak that i knew i had and fixed it, i also got my winshield wiper reservoir back in ;D and got my splash guard back on with a little modification, so my car is perfect now except for the ecu. the turbo spools up quicker and is a little louder since i fixed the exhaust leak (at the down pipe flange) and my exhaust is a hell of a lot quieter with the turbo, i'm very happy with the set up and haven't even really boosted yet ???

http://www.newbieforces.com/files/aaa1.jpg
http://www.newbieforces.com/files/aaa2.jpg

got an extra o2 bung welded in for wb baby ;D
http://www.newbieforces.com/files/aaa3.jpg

was able to keep my wiper fluid after i re ran my charge pipes to accomodate my bumper ;)
http://www.newbieforces.com/files/aaa4.jpg

you can see around the pipe that i had to cut a little out of the splash guard for it to fit, but ---- no splash guard, my teg didn't have one and i will never make that mistake again.
http://www.newbieforces.com/files/aaa5.jpg

http://www.newbieforces.com/files/aaa6.jpg

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

looks good bitch.....im still gonna run ya tho. that 40ounce piece will taste good.

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

"so I dropped the down pipe and went up to these hot chicks and I was all like
sup ladies, my name's projecteggy
I got an extra o2 bung for wideband baby
and they're like oh my god it's boosted"

that's as far as I got.

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

i swear to freaking god teg
your car is fast
please let me, please let me
suck your ass

by now, all the d series get jealous
specially when i rev to 8 grand
without puffy pillows......


that's as far as i got, teggy freestylez pwn joo!

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

haha, when I get my LS/VTEC turbo project finished we'll get together for some turbo b-series vtec rap.

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

wtf was that a duet. hahaha d series ninja's own foolios. dp looks good besides. the bottom pipe looks like a crush bent pipe. but it looks good. good work. i wish i had a welder. i was almost tempted to buy one like a week before i was gonna do my setup

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

loooks real niceeee! and The SS mani gives u some nice bling under the hood 2

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

haha we got the beasties boys here ;D are you guys looking for any groupies :-*

Re:projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
 

good eye :P it is unfortunately crush bent, i only had one 2.5" 90 mandrel. i had it done at an exhaust shop because my welder broke, they only had a crush bender. i personall think he could have got both bends out of the 90, but he wasn't hmt enough :P