projekteg = boosted!!!!!!!!!*UPDATED AGAIN W/ DOWN PIPE PICS*
NEW PICS AT BOTTOM!
NEWES PICS ON PAGE 2 well, i started my install wednesday night and got my charge pipes from i.c. to intake mounted, also got the turbo/manifold mounted and the oil lines hooked up ;D last night all i had to do was hook up my injectors, run charge pipe from turbo to i.c. and figure out what i'm gonna do about a down pipe since my welder broke :P so last night, i figure out that there is no way to hook 450's up to obd2 clips :P i have some obd1 clips coming (thanks mike ;)). also, my turbo sits so low that i had a hard time running the charge pipes without putting them too low, so i had a 90° coupler (radiator hose), that i used from turbo to a straight section of pipe, and since my welder is broke, those charge pipes are infested with couplers and clamps :P so, everythings was hooked up and my boy had just left for a minute to go to our friends house (around the corner) to grab a beer. after he left, i finished up the charge pipes, retarded the timing (no fuel management :P) and took her for a spin, by the way, i just had a block off flange on the exhaust, so basically, no wastegate and no fuel management, but ---- it, my map sensor was my wastegate ;D she sounds sick spoolin up and the plastic bosch bov actually sounds really good, it has a nice flutter to it. they heard me coming down the road they said they could hear the turbo spoolin ;D i drove it very cautiously, but any time i would hit about 4 psi, the map sensor would see the boost and the car would go limp, but hey at least i got to drive it boosted ;D i'm taking it up to my man that does exhaust to have him rig up some better charge pipes and make my down pipe. the pics i have are from wednesday night, i was too tired/excited to take more pics last night, but i'll get some tonight of the rest ;D i'll get video of my drive to the exhaust shop too, but i have no where to host it *cough*hint, hint*cough* by the way, the smokes in the pics aren't mine, they're my boys, i don't smoke ;) http://www.newbieforces.com/files/aa1.jpg http://www.newbieforces.com/files/aa2.jpg http://www.newbieforces.com/files/aa4.jpg http://www.newbieforces.com/files/aa5.jpg http://www.newbieforces.com/files/aa6.jpg http://www.newbieforces.com/files/aa7.jpg http://www.newbieforces.com/files/aa8.jpg http://www.newbieforces.com/files/aa9.jpg http://www.newbieforces.com/files/aa10.jpg http://www.newbieforces.com/files/aa11.jpg |
Re:projekteg = boosted!!!!!!!!!
It's about ------- time. :P
Is the turbo supposed to be tilted sideways like that? ??? Are they all like that? I noticed that in those other pictures you posted, but I thought it might have been the angle or something. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:projekteg = boosted!!!!!!!!!
Originally Posted by Dr.Boost
It's about ------- time. :P
Is the turbo supposed to be tilted sideways like that? ??? Are they all like that? I noticed that in those other pictures you posted, but I thought it might have been the angle or something. |
Re:projekteg = boosted!!!!!!!!!
GOOD JOB MAN ;D im doing my engine swap next week and also going to boost with my new engine im going with 8 psi of boost :o should i change my fuel mangement ?
|
Re:projekteg = boosted!!!!!!!!!
good ----, hopefully i'll be ready for daytona now, lookin good, fix that welder
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by 90boostdaccord
good ----, hopefully i'll be ready for daytona now, lookin good, fix that welder
|
Re:projekteg = boosted!!!!!!!!!
Good ---- Kevin, Im glad your finally done man, by the way i love the hmt style oil feed, reminds me of my first oil line set up, however your car is to pretty man, get an adapter and run it around the drivers side engine mount
my .02 cents Lookin sick though |
Re:projekteg = boosted!!!!!!!!!
Originally Posted by 88 Turbo Crx
Good ---- Kevin, Im glad your finally done man, by the way i love the hmt style oil feed, reminds me of my first oil line set up, however your car is to pretty man, get an adapter and run it around the drivers side engine mount
my .02 cents Lookin sick though |
Re:projekteg = boosted!!!!!!!!!
you SLUT!!! ;D
i am so jeoluous |
Re:projekteg = boosted!!!!!!!!!
FUUUUUCKKK YEAH 'teg....
|
Re:projekteg = boosted!!!!!!!!!
those charge pipes look sexy. im gonna have to make me some of those :)
|
Re:projekteg = boosted!!!!!!!!!
no management? did the tp afc not work out for you?
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by kyle
no management? did the tp afc not work out for you?
|
Re:projekteg = boosted!!!!!!!!!
---- yeah teg! now get some fuel management and take that bitch for a spin. Cant wait to see the video ;D
|
Re:projekteg = boosted!!!!!!!!!
Looks awesome man...that charge pipe looks sexy...you forgot to grind of those welds though.
I'm busy working on my ZC head...doing a HMT P&P and valve grind ;D. I'll be swapping in the ZC this weekend and boosted by next week hopefully. Go make some vid's |
Re:projekteg = boosted!!!!!!!!!
nice!
the turbo and manifold look money ;) |
Re:projekteg = boosted!!!!!!!!!
Looks good man. congrats!
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by Dr.Boost
It's about ------- time. :P
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by RENR
Originally Posted by Dr.Boost
It's about ------- time. :P
|
Re:projekteg = boosted!!!!!!!!!
Congratulations Kevin! Can't wait to see future pics and vids :)
|
Re:projekteg = boosted!!!!!!!!!
looks really good.
i especially like the pack of parliment lights that made it into a few pictures. |
Re:projekteg = boosted!!!!!!!!!
projekteg owns jOOOO!!!!
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by NCHorseplay
projekteg owns jOOOO!!!!
|
Re:projekteg = boosted!!!!!!!!!
projekteg = gay ;)
good job son. |
Re:projekteg = boosted!!!!!!!!!
nice projecteg, thats real nice, I didn't bother readin anything cause I'm a lazy ----, But i did notice that the pack of smoked and lighter are still there, hahaha SMOKER
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by projekteg
Originally Posted by kyle
no management? did the tp afc not work out for you?
|
Re:projekteg = boosted!!!!!!!!!
I am at home yO! just got back here now.
Onyx, you'll have to forgive projekteg, he ain't too smart. haha ;D |
Re:projekteg = boosted!!!!!!!!!
Nice!It IS about ------- time!
|
Re:projekteg = boosted!!!!!!!!!
this is how you get them to fit. and ill see if i can find the howto i did a while back.
if you look at where the injector plugs into the harness there is a blue "guide" there. lake a small flat screwdriver and pop it off. then you will haveto take the middle pin off the DSM injector and shave teh corners off hte outside of the injector and your done, its a perfect, tight fit. |
Re:projekteg = boosted!!!!!!!!!
Finally,after 40000+ post.Looks good.
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by shitbird
Finally,after 40000+ post.Looks good.
|
Re:projekteg = boosted!!!!!!!!!
teg i hope u dont blow ---- up
|
Re:projekteg = boosted!!!!!!!!!
Good job Teg! Looks like we're at the same point, but i've got my OBD-I swap done already :P...i'll race ya to see who finishes first ;D j/k...
EDIT: When you do your OBD-I Swap, don't forget to rewire your IAB! |
Re:projekteg = boosted!!!!!!!!!
Originally Posted by street_kings
Good job Teg! Looks like we're at the same point, but i've got my OBD-I swap done already :P...i'll race ya to see who finishes first ;D j/k...
EDIT: When you do your OBD-I Swap, don't forget to rewire your IAB! |
Re:projekteg = boosted!!!!!!!!!
nice teg ;) glade to see your boosted
the charge pipes look butter. im diggin the flate black |
Re:projekteg = boosted!!!!!!!!!
Originally Posted by onyx
this is how you get them to fit. and ill see if i can find the howto i did a while back.
if you look at where the injector plugs into the harness there is a blue "guide" there. lake a small flat screwdriver and pop it off. then you will haveto take the middle pin off the DSM injector and shave teh corners off hte outside of the injector and your done, its a perfect, tight fit. |
Re:projekteg = boosted!!!!!!!!!
Originally Posted by street_kings
Good job Teg! Looks like we're at the same point, but i've got my OBD-I swap done already :P...i'll race ya to see who finishes first ;D j/k...
EDIT: When you do your OBD-I Swap, don't forget to rewire your IAB! |
Re:projekteg = boosted!!!!!!!!!
what the ---- are iab's ???
|
Re:projekteg = boosted!!!!!!!!!
good job man
|
Re:projekteg = boosted!!!!!!!!!
Originally Posted by BLACK_DEL_SOL
GOOD JOB MAN ;D im doing my engine swap next week and also going to boost with my new engine im going with 8 psi of boost :o should i change my fuel mangement ?
|
All times are GMT -5. The time now is 03:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands