The Official HMT's Fastest Cars thread
#61
Re: The Official HMT's Fastest Cars thread
95 civic ex coupe full interior plus 200 lbs passenger and 220 lbs driver
built ls vtec/built b16 head
turbo precision sc61 20 psi
2.5" piping/big fmic
2.5" exhaust
had tranny problem grind in second and 4th hard shift.
today my best time at the track, my 2nd time racing on a track
12.17 in the 1/4
this track is not a professional track and all of the guys that raced at this track and other track said they lost 1.5 seconds off there times
the track is a old air strip with a tree light. its rough as ---- and go up hill, and once you cross the finish line you bottom out.
they don't have 0-60, or miles per hour, all they give is 1/4 mile.
I should be running mid 11's, I had no traction, even with traction bars, and the road racing slicks. I need some real slicks.
built ls vtec/built b16 head
turbo precision sc61 20 psi
2.5" piping/big fmic
2.5" exhaust
had tranny problem grind in second and 4th hard shift.
today my best time at the track, my 2nd time racing on a track
12.17 in the 1/4
this track is not a professional track and all of the guys that raced at this track and other track said they lost 1.5 seconds off there times
the track is a old air strip with a tree light. its rough as ---- and go up hill, and once you cross the finish line you bottom out.
they don't have 0-60, or miles per hour, all they give is 1/4 mile.
I should be running mid 11's, I had no traction, even with traction bars, and the road racing slicks. I need some real slicks.
#62
Re: The Official HMT's Fastest Cars thread
Originally Posted by fast2camciv
93 Honda Civic 4dr (full weight, with baby seat in the back lol)
stock z6 head, arp headstuds
y8 block, eagle rods, vitara pistons, endyn oil pump mods
z6 tranny with obx lsd
t3/t4 .60/.63 57 trim
drag manifold
3" downpipe (open pipe at the track), fabbed by me
tial style wastegate, 7lb spring
dual stage boost controller (low 7psi, high 12psi)
ssac intercooler
2.5" ic piping all done by me
chipped p28, ostrich, precision 750cc injectors, motorola 2.5 bar map, tuned with CromePro by me
22x8x15" slicks
12.96 @ 104 1.89 60'
that was last weekend...the track was kinda shitty and it was the 1st time out with the slicks so i was really babying it...i had a charge pipe that kept blowing off...out of 4 runs the 12.9 was the only one the pipe held on, i was short shifting every gear to try and keep the pipe from blowing off.
this weekend should be better...i welded a bead on all my ic pipes and i plan on upping the boost to around 15-18lbs...looking for low 12's...if all goes well...20+psi and 11's coming soon!
stock z6 head, arp headstuds
y8 block, eagle rods, vitara pistons, endyn oil pump mods
z6 tranny with obx lsd
t3/t4 .60/.63 57 trim
drag manifold
3" downpipe (open pipe at the track), fabbed by me
tial style wastegate, 7lb spring
dual stage boost controller (low 7psi, high 12psi)
ssac intercooler
2.5" ic piping all done by me
chipped p28, ostrich, precision 750cc injectors, motorola 2.5 bar map, tuned with CromePro by me
22x8x15" slicks
12.96 @ 104 1.89 60'
that was last weekend...the track was kinda shitty and it was the 1st time out with the slicks so i was really babying it...i had a charge pipe that kept blowing off...out of 4 runs the 12.9 was the only one the pipe held on, i was short shifting every gear to try and keep the pipe from blowing off.
this weekend should be better...i welded a bead on all my ic pipes and i plan on upping the boost to around 15-18lbs...looking for low 12's...if all goes well...20+psi and 11's coming soon!
12.09 @ 113 with a 1.72 60' 19psi. if i would have had one more run that night i would be in the 11's for sure! oh well next time...SOHC baby!
#63
Re: The Official HMT's Fastest Cars thread
1/8 - 8.9
mph - 79
99ek,95 b18b,99b16 tranny with lsd, crower 402's, cai, dc header, tanabe exhaust, cs 6 puck, act 11lb flwheel. thats on drag radials.
just wanted to see what it will run allmotor before i boost her.
mph - 79
99ek,95 b18b,99b16 tranny with lsd, crower 402's, cai, dc header, tanabe exhaust, cs 6 puck, act 11lb flwheel. thats on drag radials.
just wanted to see what it will run allmotor before i boost her.
#64
Re: The Official HMT's Fastest Cars thread
88 crx dx
high cr ls/vtec stock ls tranny
clutchnet 6puck unsprung and 7.5 fidianza flywheel
stock b16 head with stock cams
dc sports itr header
m/h 22 slicks
r/t .419
60' 1.951
330' 5.589
1/8 8.639 @80.17mph
1000' 11.262
1/4 13.499@100mph
not to bad for first 4 passes in the car still more in it. just gotta learn to launch this thing better and lose a little more weight
high cr ls/vtec stock ls tranny
clutchnet 6puck unsprung and 7.5 fidianza flywheel
stock b16 head with stock cams
dc sports itr header
m/h 22 slicks
r/t .419
60' 1.951
330' 5.589
1/8 8.639 @80.17mph
1000' 11.262
1/4 13.499@100mph
not to bad for first 4 passes in the car still more in it. just gotta learn to launch this thing better and lose a little more weight
#69
Re: The Official HMT's Fastest Cars thread
First time at the track with the new setup, best run was:
11.692 @ 124.65MPH with a 1.79 60ft, could have run lower with bigger slicks, or gsr 3 and 4th gears, the ls gears are lonnnngggg. Oh well more boost will fix that problem.
11.692 @ 124.65MPH with a 1.79 60ft, could have run lower with bigger slicks, or gsr 3 and 4th gears, the ls gears are lonnnngggg. Oh well more boost will fix that problem.
#70
Re: The Official HMT's Fastest Cars thread
ef3
b16a1 conversion
t3t4
pm7 ecu basemap
5psi
rx7 intercooler
1.75" piping
175/65/14 tyres
no lsd
no interior
13.7@168kph
2.4 60ft
ef3
zc dohc
td05 14b
15" dc2 rims
single spinner
chopped springs , ---- shocks
pm7 basemap , revlimiting at 6500 some reason
400x300 intercooler
2.5" piping
13.8@ 167kph
2.4 60ft