obey xenocron or else
10-14-2008, 10:17 PM
#193
3.0 BAR
Join Date: May 2005
Posts: 1,811
Re: obey xenocron or else
Originally Posted by CoreyR
where the ---- did i EVER say anything about welding 16 gauge you ------- ********? you came up with that ----, i make manifolds out of schedule 10 .109 wall pipe not ------- .065 tube. i know more about fractions and decimals then your tiny brain can comprehend, i work in a ------- machine shop you dumbshit.
Machine shop. Big ------- ----, worked in the best engine machining shop in the south after I went through tten. Been there, done that. So what you're saying is Mr Billy the shop owner tells you what pile of shavings to vaccuum up after you give him a ******* and a reach around
Your stupidity makes me want to JBW your mom's ---- shut.
10-14-2008, 10:31 PM
#195
3.0 BAR
Join Date: May 2005
Posts: 1,811
Re: obey xenocron or else
rawr you think he can read anything
Show me where I said he made a manifold in 16 gauge... I SAID he cant weld a pissant .06, and that he'd have to three pass anything he welded.
Doesn't matter what the cross tailed sperm makes anything out of. The fact is he couldn't weld it worth a ---- to begin with.
Show me where I said he made a manifold in 16 gauge... I SAID he cant weld a pissant .06, and that he'd have to three pass anything he welded.
You can *** bucket some .06" 304 stainless pipe and you think you have any amount of skill what-so-ever?
Let's see... So you show up somewhere and take a welding test on your sub 1/8" pipe on a flat weld. Now you're able to magically do flat position groove welds up to a STAGGERING what 3/16" And you can only weld flat Better yet you don't have a ------- clue about what's going on with the weld, so the priceless look on your face. Knowing the of the impending failure they let you weld for an hour to do a five minute weld.
Why Because Ill gaurentee you that means. You don't know the meaning of full penitration. Love that tiny little pock marks on the backside of the weld. That sure is classic reinforcement! You waste 5x the amount of consumeables and 10x the amount of time trying to fix your pitiful three pass welds.
Three pass? Yeah, you're a three passer... A pathetic zero pen root pass, A cap pass that looks like ***. Then to waste yet more time and try to fake the other newbie welder group you're in. You run your torch backwards ontop of the existing weld trying, and failing to make it look like something. All the while doing nothing more than trying to hide the thousand mistakes you made in the process of welding.
Let's see... So you show up somewhere and take a welding test on your sub 1/8" pipe on a flat weld. Now you're able to magically do flat position groove welds up to a STAGGERING what 3/16"
And you can only weld flat Better yet you don't have a ------- clue about what's going on with the weld, so the priceless look on your face. Knowing the of the impending failure they let you weld for an hour to do a five minute weld.Why
Because Ill gaurentee you that means. You don't know the meaning of full penitration. Love that tiny little pock marks on the backside of the weld. That sure is classic reinforcement! You waste 5x the amount of consumeables and 10x the amount of time trying to fix your pitiful three pass welds.Three pass? Yeah, you're a three passer... A pathetic zero pen root pass, A cap pass that looks like ***. Then to waste yet more time and try to fake the other newbie welder group you're in. You run your torch backwards ontop of the existing weld trying, and failing to make it look like something. All the while doing nothing more than trying to hide the thousand mistakes you made in the process of welding.
Doesn't matter what the cross tailed sperm makes anything out of. The fact is he couldn't weld it worth a ---- to begin with.
10-14-2008, 11:40 PM
#197
3.0 BAR
Thread Starter
Join Date: Apr 2005
Posts: 4,890
Re: obey xenocron or else
Originally Posted by CspecRun
LOL...You must be a broke bitch if you fight for a living...No wonder you're scamming folks.
------- retard
10-15-2008, 01:09 AM
#200
0.0 BAR
Join Date: Dec 2005
Posts: 0
Re: obey xenocron or else
Originally Posted by Toysrme
And yet you can't even god damned recognize the two most used wall thicknesses in the entire car aftermarket industry you god damned
Machine shop. Big ------- ----, worked in the best engine machining shop in the south after I went through tten. Been there, done that. So what you're saying is Mr Billy the shop owner tells you what pile of shavings to vaccuum up after you give him a ******* and a reach around
Your stupidity makes me want to JBW your mom's ---- shut.
Machine shop. Big ------- ----, worked in the best engine machining shop in the south after I went through tten. Been there, done that. So what you're saying is Mr Billy the shop owner tells you what pile of shavings to vaccuum up after you give him a ******* and a reach around
Your stupidity makes me want to JBW your mom's ---- shut.
heres the bottom line, i have far more skill then you do. you think i cant weld (even though youve never seen anythinhg ive welded) thats fine, bottom line is i get paid good money to build people turbo setups, which is more then i can say for you. my "shitty" welding skills make me twice what your "amazing" welding skills make you. you couldnt build a successful turbo kit to save your life, let alone one that actually make anything worth talking about.
so to cut it short, shut the ---- up. thanks.
P.S. youre still a ******, and everyone agrees. you know that kid noone likes, but he wont go away and tries to impress people to get them to like him but instead they just laugh at him and hate him even more?... yeah, thats you.
