Noob doing a swap....advice?
07-13-2006, 10:46 AM
#1
0.0 BAR
Thread Starter
Join Date: Jul 2006
Posts: 36
Noob doing a swap....advice?
Hi guys. I have a 1992 integra and a b16a obd0 engine.
Ive heard alot about how to do the swap from obd1 to obd0 motor.
Ive came up with the conclusion to find a obd1 b16 ecu and use that.
GIVE ME ALL THE ADVICE YOU CAN!!!!!!!!
Ive heard alot about how to do the swap from obd1 to obd0 motor.
Ive came up with the conclusion to find a obd1 b16 ecu and use that.
GIVE ME ALL THE ADVICE YOU CAN!!!!!!!!
07-13-2006, 11:01 AM
#3
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 2,949
Re: Noob doing a swap....advice?
Originally Posted by 2Gen Teg
Hi guys. I have a 1992 integra and a b16a obd0 engine.
Ive heard alot about how to do the swap from obd1 to obd0 motor.
Ive came up with the conclusion to find a obd1 b16 distributor and use that.
GIVE ME ALL THE ADVICE YOU CAN!!!!!!!!
Ive heard alot about how to do the swap from obd1 to obd0 motor.
Ive came up with the conclusion to find a obd1 b16 distributor and use that.
GIVE ME ALL THE ADVICE YOU CAN!!!!!!!!
You can use your PR4 ECU, you dont need to convert to OBD0, just use everything you have, you will need to swap your O2 sensor and alternator to that of the B18 from your integra, you also need a B16 obd1 ecu, I'm not sure if you can swap the internals from the B18, if so do that.and avoid buying an expensive ECU
07-13-2006, 11:42 AM
#4
3.0 BAR
Join Date: Jun 2005
Posts: 2,753
Re: Noob doing a swap....advice?
are you planning on just running the b16, or is this ls/vtec. there is a girl in my town who has a b16 swapped teg like that and its slow as *****. runs great, but its slower than stock. if your looking for power then just ls/vtec it till you can afford to turbo it.
07-13-2006, 01:45 PM
#5
0.0 BAR
Join Date: Dec 2003
Posts: 0
Re: Noob doing a swap....advice?
Originally Posted by Xgenturbo
You can use your PR4 ECU, you dont need to convert to OBD0, just use everything you have, you will need to swap your O2 sensor and alternator to that of the B18 from your integra, you also need a B16 obd1 ecu, I'm not sure if you can swap the internals from the B18, if so do that.and avoid buying an expensive ECU
...
Originally Posted by RotaryGeek
are you planning on just running the b16, or is this ls/vtec. there is a girl in my town who has a b16 swapped teg like that and its slow as *****. runs great, but its slower than stock. if your looking for power then just ls/vtec it till you can afford to turbo it.
So basically, what distributor could he use? Any obd1 B1X?
Use stock harness, wire in vtec
use the o2 and alternator from b18...
And of course use the stock b18 mounts
07-13-2006, 02:06 PM
#7
0.0 BAR
Thread Starter
Join Date: Jul 2006
Posts: 36
Re: Noob doing a swap....advice?
I hope its not slower than stock... 
wtf would i even do this for then
basically im just looking for advice and your thoughts about how the swap and if its worth it. waddaya think ?
vtec
wtf would i even do this for then
basically im just looking for advice and your thoughts about how the swap and if its worth it. waddaya think ?
vtec
07-13-2006, 02:19 PM
#9
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: Noob doing a swap....advice?
Originally Posted by 2Gen Teg
I hope its not slower than stock...
wtf would i even do this for then
wtf would i even do this for then
Originally Posted by crx88Si
i think he'll need a b-series Vtec dist. (for PROPER mounting).
It's all good...sometimes a nog's gotta do ghetto ---- when he's broke
