Noob doing a swap....advice?
 

Hi guys. I have a 1992 integra and a b16a obd0 engine.

Ive heard alot about how to do the swap from obd1 to obd0 motor.

Ive came up with the conclusion to find a obd1 b16 ecu and use that.


GIVE ME ALL THE ADVICE YOU CAN!!!!!!!!

Re: Noob doing a swap....advice?
 

seems like you know what you need. Whats the issue? you need to be more specific. This is also the wrong forum btw. You will also need an obd1 dizzy and the 4wire o2

Re: Noob doing a swap....advice?
 

You can use your PR4 ECU, you dont need to convert to OBD0, just use everything you have, you will need to swap your O2 sensor and alternator to that of the B18 from your integra, you also need a B16 obd1 ecu, I'm not sure if you can swap the internals from the B18, if so do that.and avoid buying an expensive ECU

Re: Noob doing a swap....advice?
 

are you planning on just running the b16, or is this ls/vtec. there is a girl in my town who has a b16 swapped teg like that and its slow as balls. runs great, but its slower than stock. if your looking for power then just ls/vtec it till you can afford to turbo it.

Re: Noob doing a swap....advice?
 

Everyone keeps telling Nick to get teh mad vtack controller :l...

He's planning on running it straight b16 y/ s1 transmission... I told him it might be a torqueless wonder but it'll be nice uptop :y

So basically, what distributor could he use? Any obd1 B1X?

Use stock harness, wire in vtec

use the o2 and alternator from b18...

And of course use the stock b18 mounts :)

Re: Noob doing a swap....advice?
 

i think he'll need a b-series Vtec dist. (for PROPER mounting).

pr4, what about the vtec!?

chip a p28 w/ del sol maps ?

use the 4-wire o2 sensor from the b18

Re: Noob doing a swap....advice?
 

I hope its not slower than stock... >:(



wtf would i even do this for then


basically im just looking for advice and your thoughts about how the swap and if its worth it. waddaya think ?

vtec :y

Re: Noob doing a swap....advice?
 

what ECU comes in the b16 del sols? we could try to find one of those

Re: Noob doing a swap....advice?
 

Your loss in torque will kick your ass in that heavy car. You're better off just slapping the b16 head on for some ls/vtec goodness and run a chipped p28.Ouch...this must be a blatant stab at me ;D It's all good...sometimes a nog's gotta do ghetto ---- when he's broke :)

Re: Noob doing a swap....advice?
 

P30 ftw...google ownz you ;)