Motor is kickin again! PICS of Carnage
Well, at about 6:30 I hit the shop with a new set of pistons and a honing tool. Ran into some sticky spots, but all came out well.
The carnage: Cylinder 1 ringlands cracked and fucked hard with no lube, (155psi compression before rebuild) Cylinder 2 ringlands cracked and fucked hard with no lube. i couldnt get some of the rings out of the lands at all, they're like pinched in there( 110psi compression before rebuild) Cylinder 3 ringlands cracked but no chunks of ringlands broken loose. lots of cylinder contact, took a while to hone out (170psi) Cylinder 4 ringlands cracked but no chunks broken loose(190psi) Now here's something I found really weird. Cylinder 1 upper rod bearing was chewed to ----, and broken in half, yet the car still ran smooth and didn't knock. ACL Bearings. Anyone have that happen before? The rest of the bearings looked great, all were plastigauged and within spec when first assembled. I'll try to get a good camera tomorrow and see if I can get some pics, right now its 3:30AM and I just wanna go to bed. Big thanks to Lincoln (EJ1 Wilcox) for all the help, that woulda totally sucked flying solo on that job, and thanks to steve(88dx) for the fly d16 pistons. nite nite http://www.boostednw.com/images/ringlands/cyl1.jpg http://www.boostednw.com/images/ringlands/cyl1b.jpg http://www.boostednw.com/images/ringlands/cyl2.jpg http://www.boostednw.com/images/ringlands/cyl2b.jpg http://www.boostednw.com/images/ringlands/cyl3.jpg http://www.boostednw.com/images/ringlands/cyl4.jpg http://www.boostednw.com/images/ringlands/bearing1.jpg |
Re: Motor is kickin again!
ur map must really suck if ur blown stock d pistons before stock d rods
good luck on round #2 ;) |
Re: Motor is kickin again!
i agree with ravage.
|
Re: Motor is kickin again!
Originally Posted by Ravage70
ur map must really suck if ur blown stock d pistons before stock d rods
good luck on round #2 ;) |
Re: Motor is kickin again!
ya fook only retards drive on cars with no tune.
|
Re: Motor is kickin again!
as if you guys never blew ringlands before ::)
|
Re: Motor is kickin again!
Just another victim motor in a long string of projects.
|
Re: Motor is kickin again!
I hope it blows up again :-*
|
Re: Motor is kickin again!
----
|
Re: Motor is kickin again!
Damn. Another motor?!?! Tune your ----, Fook. :o
|
All times are GMT -5. The time now is 02:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands