Motor is kickin again! PICS of Carnage
Well, at about 6:30 I hit the shop with a new set of pistons and a honing tool. Ran into some sticky spots, but all came out well.
The carnage: Cylinder 1 ringlands cracked and fucked hard with no lube, (155psi compression before rebuild) Cylinder 2 ringlands cracked and fucked hard with no lube. i couldnt get some of the rings out of the lands at all, they're like pinched in there( 110psi compression before rebuild) Cylinder 3 ringlands cracked but no chunks of ringlands broken loose. lots of cylinder contact, took a while to hone out (170psi) Cylinder 4 ringlands cracked but no chunks broken loose(190psi) Now here's something I found really weird. Cylinder 1 upper rod bearing was chewed to ----, and broken in half, yet the car still ran smooth and didn't knock. ACL Bearings. Anyone have that happen before? The rest of the bearings looked great, all were plastigauged and within spec when first assembled. I'll try to get a good camera tomorrow and see if I can get some pics, right now its 3:30AM and I just wanna go to bed. Big thanks to Lincoln (EJ1 Wilcox) for all the help, that woulda totally sucked flying solo on that job, and thanks to steve(88dx) for the fly d16 pistons. nite nite http://www.boostednw.com/images/ringlands/cyl1.jpg http://www.boostednw.com/images/ringlands/cyl1b.jpg http://www.boostednw.com/images/ringlands/cyl2.jpg http://www.boostednw.com/images/ringlands/cyl2b.jpg http://www.boostednw.com/images/ringlands/cyl3.jpg http://www.boostednw.com/images/ringlands/cyl4.jpg http://www.boostednw.com/images/ringlands/bearing1.jpg |
Re: Motor is kickin again!
ur map must really suck if ur blown stock d pistons before stock d rods
good luck on round #2 ;) |
Re: Motor is kickin again!
i agree with ravage.
|
Re: Motor is kickin again!
Originally Posted by Ravage70
ur map must really suck if ur blown stock d pistons before stock d rods
good luck on round #2 ;) |
Re: Motor is kickin again!
ya fook only retards drive on cars with no tune.
|
Re: Motor is kickin again!
as if you guys never blew ringlands before ::)
|
Re: Motor is kickin again!
Just another victim motor in a long string of projects.
|
Re: Motor is kickin again!
I hope it blows up again :-*
|
Re: Motor is kickin again!
----
|
Re: Motor is kickin again!
Damn. Another motor?!?! Tune your ----, Fook. :o
|
Re: Motor is kickin again!
Originally Posted by Ravage70
ur map must really suck if ur blown stock d pistons before stock d rods
good luck on round #2 ;) would you like to see the datalogs assbag? it was tuned very well.
Originally Posted by hotrex
i agree with ravage.
Originally Posted by mycrx
ya fook only retards drive on cars with no tune.
Originally Posted by Cray91
Just another victim motor in a long string of projects.
Originally Posted by unsivil_audio
Damn. Another motor?!?! Tune your ----, Fook. :o
Originally Posted by 88dx
I hope it blows up again :-*
Originally Posted by all8280bcc
agreed
|
Re: Motor is kickin again!
What are your CR #'s now? what did you end up replacing all the rod bearings or just one? We need pics ;)
|
Re: Motor is kickin again!
Originally Posted by 88dx
What are your CR #'s now? what did you end up replacing all the rod bearings or just one? We need pics ;)
ok you talked me into it... |
Re: Motor is kickin again! PICS of Carnage
I'm glad you made it home last night okay! I was so tired for that damn drive home, I almost fell asleep.
Did you ever figure out what that squeaking sound was? And did you get a chance to break it in a little better on the way home? I'm interested to see what the compression test results will be. |
Re: Motor is kickin again! PICS of Carnage
Originally Posted by ej1 wilcox
I'm glad you made it home last night okay! I was so tired for that damn drive home, I almost fell asleep.
Did you ever figure out what that squeaking sound was? And did you get a chance to break it in a little better on the way home? I'm interested to see what the compression test results will be. i dont know how well it will break in, but theres no smoke so i guess thats promising. now if i can just get my oil return to stop leaking i will be set. as for the compression, after about almost 100 miles on it now, it seems to stil puff outta the oil cap quite a but, but theres nothing coming out of the breather, so I am assuming its just normal amount. car stinks pretty bad still, need to spray out the engine bay with some degreaser. |
Re: Motor is kickin again! PICS of Carnage
----. that sucks man. Whast the setup this time? (or did I miss it?...I'm tired as hell)
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by B16CRXT
----. that sucks man. Whast the setup this time? (or did I miss it?...I'm tired as hell)
|
Re: Motor is kickin again! PICS of Carnage
I bet your cylinder walls looked hot :-X
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by 88dx
I bet your cylinder walls looked hot :-X
nothing like draining down a couple OE's while you rebuild a motor. |
Re: Motor is kickin again! PICS of Carnage
wow. i agree with everyone else. shitty tune.
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by FooK
Originally Posted by 88dx
I bet your cylinder walls looked hot :-X
nothing like draining down a couple OE's while you rebuild a motor. |
Re: Motor is kickin again! PICS of Carnage
Originally Posted by junkyard racer
wow. i agree with everyone else. shitty tune.
the tune was fine, perfectly conservative. earlier in the day i was attempting to work out my wastegate issues with the internal 14b gate, and the changes i made ended up making a couple unexpected extra pounds of boost in the top of 4th. dipshits. |
Re: Motor is kickin again! PICS of Carnage
bah, ---- happens and parts break (I was at a nice afr in the 11s with conservative timing when my ringlands broke......at 14 psi)...nice work on the quickie rebuild...maybe both of ours will hold together for a bit. I like seeing people fix their ---- fast because ive seen too many cars just sit and collect dust when ---- goes a little wrong (like mine on previous occasions). so instead of bashing him on how/why it broke, he gets a thumbup for getting it moving again
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by ghettoturbo
bah, ---- happens and parts break (I was at a nice afr in the 11s with conservative timing when my ringlands broke......at 14 psi)...nice work on the quickie rebuild...maybe both of ours will hold together for a bit. I like seeing people fix their ---- fast because ive seen too many cars just sit and collect dust when ---- goes a little wrong (like mine on previous occasions). so instead of bashing him on how/why it broke, he gets a thumbup for getting it moving again
|
Re: Motor is kickin again! PICS of Carnage
srry if i misseed it but how much boost were you pushing when this happened... were you beating the ---- of it or just cruise'n
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by ososlohatch
srry if i misseed it but how much boost were you pushing when this happened... were you beating the ---- of it or just cruise'n
|
Re: Motor is kickin again! PICS of Carnage
damn shitty deal what was your setup ?
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by ososlohatch
damn shitty deal what was your setup ?
your basic 14b/hf setup. |
Re: Motor is kickin again!
Originally Posted by FooK
Originally Posted by unsivil_audio
Damn. Another motor?!?! Tune your ----, Fook. :o
|
Re: Motor is kickin again!
Update: did a cold temp compression test today (not enough time on lunch break to warm the car up) and tested 195psi give or take a couple psi on all 4 cylinders, appears to be sealing up good.
Originally Posted by unsivil_audio
What's that now, like; d-series - 6, Fook - 0? ;) Its pretty obvious that detonation killed those ringlands not a lean condition, so obviously your ---- wasnt tuned conservatively enough that your motor couldnt handle a few more lb's of boost for a few seconds.
are you really still out to seem cool by dogging on my tune? I thought I made it perfectly clear that no lean condition caused those ringlands to break, and I never argued that detonation is the culprit. Its not terribly surprising, 19 degrees of timing and weak cast pistons on creeps from 13-14psi, ------- duh. Like I give a ---- anyways, I already have the motor rebuilt and running good. |
Re: Motor is kickin again! PICS of Carnage
bitch ass ----------ers.
|
Re: Motor is kickin again! PICS of Carnage
---- YOU FOOK AND YOUR PEICE OF ----, ROLL UP ON ME ON THE FREEWAY FUCKER AND THEN TALK ---- YOU LITTLE BASTARD
|
Re: Motor is kickin again! PICS of Carnage
Originally Posted by Nate Sack
---- YOU FOOK AND YOUR PEICE OF ----, ROLL UP ON ME ON THE FREEWAY FUCKER AND THEN TALK ---- YOU LITTLE BASTARD
$100 says mycrx knows this guy. |
Re: Motor is kickin again! PICS of Carnage
Originally Posted by Nate Sack
---- YOU FOOK AND YOUR PEICE OF ----, ROLL UP ON ME ON THE FREEWAY FUCKER AND THEN TALK ---- YOU LITTLE BASTARD
|
Re: Motor is kickin again! PICS of Carnage
after i mud hole your ass i'm gonna slap my nuts all over your ------- face you ----
|
Re: Motor is kickin again! PICS of Carnage
THATS RIGHT BABY, TAKE YOUR 13YO COCK DOWN THE STREET BEFORE I COME OVER THERE AND ---- YOUR ASS
-hotrex |
Re: Motor is kickin again! PICS of Carnage
Originally Posted by Nate Sack
after i mud hole your ass i'm gonna slap my nuts all over your ------- face you ----
|
Re: Motor is kickin again! PICS of Carnage
I like the super fast rebuild, was the block still in the car too?
quit fighting like a bunch of fags, interneting yelling is stupid. |
Re: Motor is kickin again! PICS of Carnage
Originally Posted by jung4g
I like the super fast rebuild, was the block still in the car too?
|
Re: Motor is kickin again! PICS of Carnage
Damn dude, your tune was ------- dead on, that's pretty impressive...
I need to do some more work on my tune, I'd like to see my AF curve that flat. Glad to hear your car is running well and you have good compression. |
All times are GMT -5. The time now is 09:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands