Re: insturment cluster question
 

if you installed the dimmer you should see if you pinched the wire somewhere.

Re: insturment cluster question
 

ill check the wireing of the dimmer but i think its grounding somewhere..

Re: insturment cluster question
 

that could be the cause of it,i've had that problem in some buildings where bulbs were burning out, and just checking the switch did the trick.

Re: insturment cluster question
 

well i check the harness on the dim light switch. i got 24.8v on the connecter and when i check to see if i can connect pin 1 with a good ground it spark but when i connect pin 3 to a good ground the cluster's lights work. so i really dont know what to do so you guys have any suggestions in what to do?

Re: insturment cluster question
 

sounds like you wired the dimmer wrong.

Re: insturment cluster question
 

i didnt installed the dimmer nor tamper with it, it just stop working for some reason. i guess im going to take it to a shop or figure out where the problem is. thanx guy for your advise and knowledege ;D :y

Re: insturment cluster question
 

you said you got the cluster to light up when you crossed pin 3. try runnign a new ground. maby it got cut, or something

good luck.

Re: insturment cluster question
 

24.8v? are you working on an airplane?

Re: insturment cluster question
 

24.8 volts is way more than you should have there. Do your headlights seem ultra-bright for some reason? Could be a bad regulator in your alternator that might have taken out the dimmer in the process. Check the output voltage on the alternator as well to make sure.

Re: insturment cluster question
 

i didnt even catch the 24 volt thing