I got my block from the machinist
Next step: splog
|
Re: I got my block from the machinist
ok JD, get to it.
|
Re: I got my block from the machinist
JD whats the ETA on the beast?
|
Re: I got my block from the machinist
Stealth Shuttle +5
|
Re: I got my block from the machinist
Originally Posted by Joseph Davis
Next step: splog
|
Re: I got my block from the machinist
What the hell is a splog?
|
Re: I got my block from the machinist
sp? log = log manifold? or, maybe too much time on teh internet
|
Re: I got my block from the machinist
Originally Posted by ichbinsobose
Stealth Shuttle +4
|
Re: I got my block from the machinist
Pssst... Hey kid,,,,, ya wanna buy some VTAK???
LOL... Cant wait man |
Re: I got my block from the machinist
damn i took my block to the shop down the road and had it bored 20 over and had the head surfaced and new valves and seals and a 3 angle valve job and got it back 4 days later. must have just beem luck. still gotta get it notched though.
|
Re: I got my block from the machinist
wtf jd you know better than to make a post without pics ::)
|
Re: I got my block from the machinist
In 4 Pics
|
Re: I got my block from the machinist
Suicidal Penetration LOG?
The only machine shop I use usually has the block for 4-6 months. I wouldn't attempt to deal with anyone else though. |
Re: I got my block from the machinist
sounds like better get you those washers.
|
Re: I got my block from the machinist
Originally Posted by RotaryGeek
damn i took my block to the shop down the road and had it bored 20 over and had the head surfaced and new valves and seals and a 3 angle valve job and got it back 4 days later. must have just beem luck. still gotta get it notched though.
|
Re: I got my block from the machinist
Alright, I will bite too, what's a splog?
|
Re: I got my block from the machinist
splog
A splog (spam blog) is a fake blog created solely to promote affiliated Web sites, with the intent of skewing search results and artificially boosting traffic. Some splogs are written like long-winded ads for the Web sites they promote; others have no original content, featuring either nonsense or content stolen from authentic Web sites. Splogs include huge numbers of links to the Web sites in question to fool Web crawlers (programs that search the Web for sites to index). The sploggers associate popular search keywords with their pages so that the splog links turn up in blog search results and are sent out as search subscription notifications through e-mail and RSS feeds. ??? |
Re: I got my block from the machinist
I got some ad clicks for your splog trick beotch ;D
|
Re: I got my block from the machinist
Splog is all this and more; much more than your puny minds can comprehend. Splog>all
|
Re: I got my block from the machinist
darton's?
|
Re: I got my block from the machinist
I cant believe you didnt put pics up >:D
|
Re: I got my block from the machinist
oh yeah i fogot about them cleaning it too. all the work looks really good too. too bad that was like a year and a half ago and it still hasnt changed. got he eagle ods tha need to be line bored before i figure out what bearings i need, the i need 20 over pistons and rings. then a bottom end gasket kit and a obd1 dizzy so i can put it in my eg phodo.
|
Re: I got my block from the machinist
I know what splog stands for... but I think JD is letting the suspense build for the final unleashing
|
Re: I got my block from the machinist
Originally Posted by chris
darton's?
|
Re: I got my block from the machinist
85mm ITR style pistons perhaps? ITR style pistons in 84mm block have been proven to make as much power as super high compression pistons of a different style in NA. RS does some good ----, including making pistons.
|
Re: I got my block from the machinist
Miata?
|
Re: I got my block from the machinist
Oh it's for the Miata?
|
Re: I got my block from the machinist
i didnt even realize he had a miata yet...did i miss something?
|
Re: I got my block from the machinist
Word... JD we need a meaningful update. Quit being a flaky bastard.
|
Re: I got my block from the machinist
Yeah Im pretty sure this is for the CRX.
I wanna see pics. Do it. |
Re: I got my block from the machinist
Torgan, shut the ---- up. If you ever insinuate I would own a slow faggot NA build again I will kill you.
|
Re: I got my block from the machinist
---- off I wasn't insinuating a slow faggot NA build. It was just a question of using the very effective RS ITR style piston.
|
Re: I got my block from the machinist
OK then, ---- you for insinuating I would run anything from a faggot Hype-R, or facsimile thereof. ---- you and your bullshit desire to be anally penetrated by VTEC camshafts. SPLOG OWNS YOU
|
Re: I got my block from the machinist
Go build a K20.
|
Re: I got my block from the machinist
you planning on running a twin scroll?
|
Re: I got my block from the machinist
Originally Posted by Joseph Davis
Torgan, shut the ---- up. If you ever insinuate I would own a slow faggot NA build again I will kill you.
I lLOLed |
Re: I got my block from the machinist
JD let me in on his top secret build... he'll be using a cdm b18-block to k20 head adapter to utilize the super high tech horsepower creating jdm magic it employs running a 14:1 compression with 4 remote mounted t25 turbos for the ultimate budget boost sleeper build, all of which is going in a 1994 miata.
|
Re: I got my block from the machinist
Actually, so did I. ;D
Originally Posted by EGgyLShatch
JD let me in on his top secret build... he'll be using a cdm b18-block to k20 head adapter to utilize the super high tech horsepower creating jdm magic it employs running a 14:1 compression with 4 remote mounted t25 turbos for the ultimate budget boost sleeper build, all of which is going in a 1994 miata.
|
Re: I got my block from the machinist
Split pulse log to use with the Hx-35?? ???
|
Re: I got my block from the machinist
skoals ls turbo build will own all
all key parts will be marinated in black boss polish porter jd i think you should do the same |
All times are GMT -5. The time now is 02:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands