How do i install a vtec light?
 

Ya Ya.. i know.. rice.. but it feels like it is only going from 4800 rpm to 7000 rpm... it should be working all the way up to 8000 right? Well.. whats the safest and easiest way to do this?

Re:How do i install a vtec light?
 

find the vtec wire and put in a bosch 12v relay.


i will draw you up a diagram give me a minute.

Re:How do i install a vtec light?
 

http://www.shortyz.net/vteclightrelay.jpg

that should do the trick.

Re:How do i install a vtec light?
 

the vtec wire is a (+) power source (isn't it)...so why the need for the relay?

Re:How do i install a vtec light?
 

a realay for a vtec light. wtf.. i thought all u need is a 12v led light u can get one from a auto parts store.. or radio shack... and just hook the power wire from it to the vtec wire and blahdow!! light comes on when vtec does!!

Re:How do i install a vtec light?
 

i duno what kinda of light your using..
an led 12v would work fine but if its any kind of power drawing light.. it could drop the voltage on the vtec wire when it turns on..

plus what voltage is the vtec wire 12v? or is like some funky voltage..

Re:How do i install a vtec light?
 

VTEC is a 12V+ when on. And if you tap the wire (do not cut it) it will not affect the voltage.

Re:How do i install a vtec light?
 

dont cut the wire.. hmmmmmm what if u did a mini swap and the vtec doesnt even goto the ecu.. just to the v-afc or the rpm switch wichever way u went.. :) i got the vafc and i hooked the led 12v light to the wire with the afc..

Re:How do i install a vtec light?
 

Re:How do i install a vtec light?
 

yea if i had a vtec ecu id just use splice thing on it.. clamp it down lock it over.. getttttterrr done!!