Re:Got my ECU chipping supplies j0!
Originally Posted by chris
I got some readin too do very cool
This is a great system for people who bitch about not having engine management options for non-hondas. Hopefully I can do a good writeup for HMT v2 to get the word out on this and hopefully show that its not that complicated of a system |
Re:Got my ECU chipping supplies j0!
Originally Posted by Whitey
Originally Posted by chris
I got some readin too do very cool
This is a great system for people who bitch about not having engine management options for non-hondas. Hopefully I can do a good writeup for HMT v2 to get the word out on this and hopefully show that its not that complicated of a system |
Re:Got my ECU chipping supplies j0!
Originally Posted by BlackDragon
im actually interested in your project there...by the way...have enough natty there? lol
Oh so what all my other projects were boring and not interesting? :P And no you can never have enough Natty ;) |
Re:Got my ECU chipping supplies j0!
I had a kid proposition me to solder up a Megasquirt for him so I started looking at the various.
Definitely could be overwhelming ordering all those parts from Digikey so the Glen's Garage option is a good one. You had to wait quite a while to receive this kit right? What other options did you get (or could have)? There is a remote display option correct? and a remote tuning option too no? It would def be fun trying to do a Megasquirt one of these days. |
Re:Got my ECU chipping supplies j0!
Yeah, I ordered mine from Glen's Garage. It actually only took me 4 hours to do, but I kept getting headaches from the solder.
Have fun man. |
Re:Got my ECU chipping supplies j0!
this is interesting. id love to see a write up on this when your finished.
|
Re:Got my ECU chipping supplies j0!
Originally Posted by xenocron
I had a kid proposition me to solder up a Megasquirt for him so I started looking at the various.
Definitely could be overwhelming ordering all those parts from Digikey so the Glen's Garage option is a good one. You had to wait quite a while to receive this kit right? What other options did you get (or could have)? There is a remote display option correct? and a remote tuning option too no? Yeah Glen's garage definitely practices shipping 102. I ordered mine Dec 8th and I got it Feb 14. I guess I got lucky cause people who ordered before me still haven't gotten their yet. However I think it was worth the wait, he's only charging a couple more dollars than ordering just from digikey but everything is bagged and labeled, worth every penny. There's alot of other options available with megasquirt. There is a new version of MS comming out soon and its supposed to be really good. You can also datalog with MS; http://www.megasquirt.info/manual/log_noisy_tps.GIF Here's some of the options for megasquirt; 12x12 fuel tables 12x12 spark tables DualTable code Roger Enns' injector staging code Rev limiter Launch control Overboost protection Mappable Air:Fuel Ratio target for use with wideband O2 Coolant temp timing advance Inlet temp timing retard MAPdot accel/decel enrichment Anti-rev / Traction Control feature Over-run fuel cut Ignition control options: . No ignition (fuel only) . Distributor for even-fire 2 stroke 1,2,3,4 cyl and even-fire 4 stroke 1,2,3,4,5,6,8,10,12,16 cyl . Ford EDIS . Dual Ford EDIS (e.g. 2 EDIS4 modules on a V8) TEST . Dodge Neon crank decoder TEST . Ford TFI . GM 7 pin HEI . Toothed wheel decoder TEST Switchable tables Boost control TEST Water injection control Dual EGO sensor support Shift Lights Outputs 1, 2, 3 and 4 Knock sensor input PWM idle for use with variable valves TEST Nitrous control (min rpm, new timing map or fixed retard There's even megaview that you can build which is basically a digital dash: http://www.msefi.com/files/megaview_122.jpg here's what it will show; All runtime parameters are displayed in a scrolling fashion on the display. In Runtime Ticker-tape mode, the parameters displayed include: time since start [SECS] up to 65,535 seconds (216-1), over 18 hours, current engine operation state [ENGINE] (CRANK/RUN), warm-up [WRMENRICH] enrichment (ON/OFF), acceleration [ACCENRICH] enrichments (ON/OFF), engine speed [RPM], injector pulse width [PW(MS)]. intake manifold absolute pressure [MAP(KPA)], barometric pressure [BARO(KPA)], coolant temperature [CLT(F)], intake air temperature [MAT(F)], throttle position sensor voltage [TPS(V)], battery voltage [BAT(V)] Exhaust sensors voltage [EGO(V)] EGO correction [EGOCOR(%)], air density correction [AIRCOR(%)] barometric pressure correction [BARCOR(%)], current volumetric efficiency [VECOR(%)] warm-up correction [WRMCOR(%)] acceleration enrichment correction [ACCOR(MS)] all computed enrichments [GAMMA(%)], and And remember everything is cheap as hell 8) |
Re:Got my ECU chipping supplies j0!
Ewww..you're gonna have to use Ford EDIS and add a crank sensor. I'm waiting till UltraMegaSquirt (bukkake!) comes out.
-Tim |
Re:Got my ECU chipping supplies j0!
Originally Posted by TekPhobia
Ewww..you're gonna have to use Ford EDIS and add a crank sensor. I'm waiting till UltraMegaSquirt (bukkake!) comes out.
-Tim You can also use the coils off a 4g63. I'm not worried about Timing, for my project its not necessary yet I just need fuel |
Re:Got my ECU chipping supplies j0!
1 Attachment(s)
|
All times are GMT -5. The time now is 02:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands