the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
#1
the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
well, some of you remember about 2 weeks ago when we had a little south east install on my boys si, so here's the pics, i've just been kind of lazy getting them up...
ah yes, my hand me down ssauto ---- mani
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/1.JPG[/img]
lil windage tray inspection, you can also see the brace for the mani coming off the block where the a/c compressor use to be.....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/2.JPG[/img]
the .63/.60 hangin off the ssauotpoop wit da gungsta lean...
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/3.JPG[/img]
my new bumper for da red si
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/4.JPG[/img]
it's lucas wit da lid off....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/5.JPG[/img]
lol, i thought i was looking in my engine bay when i was boosted, then i rememberd mines red :P
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/6.JPG[/img]
my jb welded oil pan that you guys said would never last, now it's on it's second car, we just swapped pans since i'm n/a right now anyways....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/7.JPG[/img]
my sexy old dp, and beautiful charge pipes held together by home depot couplers and little napa action....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/8.JPG[/img]
car port creations is the name of my shop in case you're wondering
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/9.JPG[/img]
fitment of the 'garrison front mount PIPE'
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/10.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/11.JPG[/img]
front mount pipe installed...
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/12.JPG[/img]
everything pretty much installed expect for injectors and little ----....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/15.JPG[/img]
just beautiful........
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/16.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/17.JPG[/img]
superduperuberdoober.......
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/18.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/19.JPG[/img]
dirt south injector install, beeotch.......
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/171.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/172.JPG[/img]
now, here's a little video goodness for you haters and masturbaters RIGHT CLICK, SAVE.......
dirty south spinnage.. (not spinache)
well, i hope you enjoyed the show, oh wait, it's not over yet.......
now, on to the BAD.....
well, to sum it up, we finished the install at about 4am in the morning, he had no intercooler as you can see in the above pics (scheduled for delivery the next day, but he couldn't wait :P ), running some stock fouled out plugs, non intercooled at 9 psi with 10.2:1 c/r, well, you know what comes next
w00t w00t, ringland ownage beeotch!!!!!!!!! 3 out of 4 were trashed, but this one was the worst
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/25.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/26.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/27.jpg.JPG[/img]
damn those cyl walls still look fresh, with almost 90k on the car....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/28.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/30.jpg.JPG[/img]
head still looking very clean and fresh also, more than likely do a valve adjustment while it's apart also. see what changing your oil regularly does for your motor
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/29.jpg.JPG[/img]
now, for the best part.. this happened last week and the weather started getting real nasty around here and we don't have a garage, so my buddy got impatient and took it to a local shop, they told him 1400 for a new bottom end installed, and he was about to do it i told him to go get his ------- car right now! then i called my boy who had a spare built block, and he was willing to sell it, so here's the replacement killer, b16a1 short block w/ eagle rods & je 9:1 pistons, picked this up for 700 bucks for him it will be going in this weekend along with intercooler that came the day after he blew it up :P and then to the dyno for some 300whp love
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/31.jpg.JPG[/img]
well, that's pretty much the good and the bad, but what about teh 'pwnage' you may be asking, well, a little word of advice, don't fall asleep in my car port at 3am during an install unless you want to get owned on the interweb this ones for you joe.........
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/20.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/21.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/22.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/23.JPG[/img]
ah yes, my hand me down ssauto ---- mani
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/1.JPG[/img]
lil windage tray inspection, you can also see the brace for the mani coming off the block where the a/c compressor use to be.....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/2.JPG[/img]
the .63/.60 hangin off the ssauotpoop wit da gungsta lean...
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/3.JPG[/img]
my new bumper for da red si
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/4.JPG[/img]
it's lucas wit da lid off....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/5.JPG[/img]
lol, i thought i was looking in my engine bay when i was boosted, then i rememberd mines red :P
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/6.JPG[/img]
my jb welded oil pan that you guys said would never last, now it's on it's second car, we just swapped pans since i'm n/a right now anyways....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/7.JPG[/img]
my sexy old dp, and beautiful charge pipes held together by home depot couplers and little napa action....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/8.JPG[/img]
car port creations is the name of my shop in case you're wondering
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/9.JPG[/img]
fitment of the 'garrison front mount PIPE'
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/10.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/11.JPG[/img]
front mount pipe installed...
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/12.JPG[/img]
everything pretty much installed expect for injectors and little ----....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/15.JPG[/img]
just beautiful........
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/16.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/17.JPG[/img]
superduperuberdoober.......
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/18.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/19.JPG[/img]
dirt south injector install, beeotch.......
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/171.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/172.JPG[/img]
now, here's a little video goodness for you haters and masturbaters RIGHT CLICK, SAVE.......
dirty south spinnage.. (not spinache)
well, i hope you enjoyed the show, oh wait, it's not over yet.......
now, on to the BAD.....
well, to sum it up, we finished the install at about 4am in the morning, he had no intercooler as you can see in the above pics (scheduled for delivery the next day, but he couldn't wait :P ), running some stock fouled out plugs, non intercooled at 9 psi with 10.2:1 c/r, well, you know what comes next
w00t w00t, ringland ownage beeotch!!!!!!!!! 3 out of 4 were trashed, but this one was the worst
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/25.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/26.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/27.jpg.JPG[/img]
damn those cyl walls still look fresh, with almost 90k on the car....
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/28.jpg.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/30.jpg.JPG[/img]
head still looking very clean and fresh also, more than likely do a valve adjustment while it's apart also. see what changing your oil regularly does for your motor
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/29.jpg.JPG[/img]
now, for the best part.. this happened last week and the weather started getting real nasty around here and we don't have a garage, so my buddy got impatient and took it to a local shop, they told him 1400 for a new bottom end installed, and he was about to do it i told him to go get his ------- car right now! then i called my boy who had a spare built block, and he was willing to sell it, so here's the replacement killer, b16a1 short block w/ eagle rods & je 9:1 pistons, picked this up for 700 bucks for him it will be going in this weekend along with intercooler that came the day after he blew it up :P and then to the dyno for some 300whp love
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/31.jpg.JPG[/img]
well, that's pretty much the good and the bad, but what about teh 'pwnage' you may be asking, well, a little word of advice, don't fall asleep in my car port at 3am during an install unless you want to get owned on the interweb this ones for you joe.........
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/20.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/21.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/22.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/23.JPG[/img]
#2
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
lol.. it looks like that piston melted from being lean.. (melting) and the ringland broke because of detonation
and whoever was driving sucks at teh skillz
and whoever was driving sucks at teh skillz
#3
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
man all i see is yellow zip ties, ahh everywhere!
lol.. man your friend has no luck.. atleast he's got a built motor now.. say, he's going to be making more power then you huh? :P
lol.. man your friend has no luck.. atleast he's got a built motor now.. say, he's going to be making more power then you huh? :P
#4
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
Originally Posted by Random Hero
lol.. it looks like that piston melted from being lean.. (melting) and the ringland broke because of detonation
and whoever was driving sucks at teh skillz
and whoever was driving sucks at teh skillz
Originally Posted by crx88Si
man all i see is yellow zip ties, ahh everywhere!
lol.. man your friend has no luck.. atleast he's got a built motor now.. say, he's going to be making more power then you huh? :P
lol.. man your friend has no luck.. atleast he's got a built motor now.. say, he's going to be making more power then you huh? :P
#6
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
Originally Posted by Random Hero
lol.... my all motor setup spins the tires like that ... lol... being new to boost is no excuse for short shifting.
#7
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
humm this looks familiar :P
guess its working for you ok.
what you using for tuning?
[img width=640 height=480]http://www.draglab.com/hmt/projektegdizzle/18.JPG[/img]
guess its working for you ok.
what you using for tuning?
[img width=640 height=480]http://www.draglab.com/hmt/projektegdizzle/18.JPG[/img]
#8
Re:the good, the bad, and the pwnage.. *se install update* 56k, BIG no no!
Originally Posted by biggmike
humm this looks familiar :P
guess its working for you ok.
what you using for tuning?
guess its working for you ok.
what you using for tuning?