Found the Clutch problem!!!!!!!!!!!!!!!
Well I pulled the tranny and the clutch was fine as well as the pressure plate and bearing. BUT here is the problem.
http://pic16.picturetrail.com/VOL695...1/74103898.jpg SOOO can i use the old bolts and what could have caused this? I torqued them down to 81lbs. I did forget to use LOC-TITE but could that happen so quickly? only 200 miles? The crank bolt holes look ok not stripped or anything. |
Re:Found the Clutch problem!!!!!!!!!!!!!!!
If the socket will tighten them, I'd say use some thread locker and give it another whirl. ;D
|
Re:Found the Clutch problem!!!!!!!!!!!!!!!
I've never even used a torque wrench or Loc-Tite for flywheel bolts and I've never had any problems. :-\
I probably juts jinxed myself. ::) __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Found the Clutch problem!!!!!!!!!!!!!!!
i would get 2 new bolts and some loctite, and go again.
better safe than sorry. Ben |
Re:Found the Clutch problem!!!!!!!!!!!!!!!
^ I was just gonna say that.
|
Re:Found the Clutch problem!!!!!!!!!!!!!!!
great....
glad it`s nothing expensive. def.ly use thread locker |
Re:Found the Clutch problem!!!!!!!!!!!!!!!
thats what im going to do...BUT what could have caused it.. DR.Boost said he never had problems.
|
Re:Found the Clutch problem!!!!!!!!!!!!!!!
ive never seen that before
u probably got lazy and stopped screwing them in :-X |
Re:Found the Clutch problem!!!!!!!!!!!!!!!
yea, u might had forgot to tighten them
|
Re:Found the Clutch problem!!!!!!!!!!!!!!!
I suggest getting some thread locker. The marks look weird though, they don't look like straight grinding on top, can you see where it hit. Can you see any marks that hte bolts caused, cuz they hit something.
|
All times are GMT -5. The time now is 10:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands