first gen integra LS w/ d16a1, what trans? 5spd manual.
08-09-2007, 10:22 PM
#1
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 0
first gen integra LS w/ d16a1, what trans? 5spd manual.
trying to find out what trans, its a running car, shifts fine, but no underbody mounts left thanks to rust.
i can get this "engine/trans for $300" is it a deal? is this transmission any good?
i can get this "engine/trans for $300" is it a deal? is this transmission any good?
08-10-2007, 01:02 AM
#3
3.0 BAR
Join Date: Aug 2003
Location: NE-PA
Posts: 4,666
Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
Or you can try the uber-ghetto way and fab up your own custom mounts to fit into an ED/EF chassis. Did that for a friend, solid mount out of plate steel...car rattled like a **** and like to break ----. :P
08-10-2007, 12:32 PM
#6
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
Originally Posted by stillnoturbo
That one kid on here bolt a Z6 into his 1G teg. Said that the tranny slid right on but just didn't use a couple bolts.
That is true but again the mounts like up in the 1st gen teg/1st gen crx/3rd gen civic
You have to use all the 86-89 clutch/flywheel
They are built tough I believe bisi was using the 86-89 teg trans for sometime
08-10-2007, 02:54 PM
#9
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 0
Re: first gen integra LS w/ d16a1, what trans? 5spd manual.
Originally Posted by Joseph Davis
CG trans FTW!!
Give $100 for the drivetrain. If the car's rusted away the drivetrain needs gone through.
Give $100 for the drivetrain. If the car's rusted away the drivetrain needs gone through.
