HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Dyno'd the Ls/Vtec today... (https://www.homemadeturbo.com/general-discussion-6/dynod-ls-vtec-today-4155/)

HMT-Admin 04-23-2003 03:18 PM

Dyno'd the Ls/Vtec today...
 
Well I figured since I would be making another 1/4 mile pass at the next event at (pacific raceways) I should probably dyno tune the car just to make sure everything was ok at higher boost levels.

https://www.homemadeturbo.com/ride/89si2/dyno1.jpg

https://www.homemadeturbo.com/ride/89si2/dyno2.jpg

Started off making 238 to the wheels on the first run, and found out the car was running extremely rich, 10.0's A/F all the way past 5000rpms, after doing a bit of tuning, and getting the A/F to a more relistic level, the car was making decent power. Boost was bouncing from 11-12psi & holding a decent 12.0 to 12.7 a/f

https://www.homemadeturbo.com/ride/89si2/dyno.jpg

Overall I ended up with 263.5hp & 201tq, The red line shows my base run back when the car was NA (167hp) that wasnt the best one, I have no idea why he posted that one.. But it was 174hp the best NA. Maybe it was just to compare...

So roughly this engine is around 310HP at the Crank, I'm happy and its pretty much what I expected. I could probably tuned a bit more, and work with the cam timing, but thats another day :)

Jeff Frank





leed 04-23-2003 03:53 PM

Re:Dyno'd the Ls/Vtec today...
 
The low speed cams on the GRS's look like they make some good torque. 263 should get you some sweet peg legs :)

HMT-Admin 04-23-2003 04:06 PM

Re:Dyno'd the Ls/Vtec today...
 
shhhhhhhhhhhhhhhhhhhh we dont talk about the peg leg..... I'm very sensitive about that, since I get smashed at street racing, ahhh shiet >:(

crippledgiraffe 04-23-2003 04:28 PM

Re:Dyno'd the Ls/Vtec today...
 
A pirate walks into a bar with a steering-wheel on his crotch.

The bartender says, "what's with the steering wheel on your crotch?"

The pirate replied, "Aaaargh, it's driving me nuts!"

Semnos 04-23-2003 04:35 PM

Re:Dyno'd the Ls/Vtec today...
 
hmmm making me jealous with the LS/Vtec

turbohf 04-23-2003 04:45 PM

Re:Dyno'd the Ls/Vtec today...
 
HAHAHAHA that was great...

RENR 04-23-2003 04:49 PM

Re:Dyno'd the Ls/Vtec today...
 
wow man thats tight. good setup , i like it!! ;D

tranceminister 04-23-2003 05:19 PM

Re:Dyno'd the Ls/Vtec today...
 
Damn Jeff, that car must fly!!! How much does it weigh?

HMT-Admin 04-23-2003 05:35 PM

Re:Dyno'd the Ls/Vtec today...
 
havent weighed it.... my guess is around 2100 or so give or take 50..


Rolla1990 04-23-2003 06:18 PM

Re:Dyno'd the Ls/Vtec today...
 
Very, very impressed! Good job, dude!


All times are GMT -5. The time now is 08:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands