HomemadeTurbo - DIY Turbo Forum
Page 3 of 5
1
2
3
4
5
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   axle problem (https://www.homemadeturbo.com/general-discussion-6/axle-problem-17707/)

projekteg 03-22-2004 01:35 PM
Re:axle problem
 
Originally Posted by m76
hold on let me get this right first fix the dent then use the breakerbar is that correct? or can i us the breakerbar w/o lifting the dent?
no, get the damn dent out, then take the nut off, it's not hard to get the dent out, are you drunk?

crx2fast 03-22-2004 01:39 PM
Re:axle problem
 
hes got to be ::)

m76 03-22-2004 01:40 PM
Re:axle problem
 
You guys are some funny bitches i said before i tried that an broke 2 flathead screw drivers. Now today i have to buy some more and lift the dent. Thanks for the info.

OnYx 03-22-2004 01:53 PM
Re:axle problem
 
get a longer pole and MAKE SURE you are going the right direction.. remember lefty loosie righty tighty.... use the 4 foor prybar and go get this http://www.sears.com/sr/javasr/produ...id=00944202000(atleast this is what i use) and it works perfect! I also use an old snap-on impact driver set with that bar to get all sorts of bolts off (crank pully ;) ) all in all i have about 6 feet of bar length and i use minimal pressure to pop that nut.

Spenser 03-22-2004 02:10 PM
Re:axle problem
 
Originally Posted by projekteg
Originally Posted by Spenser
Well first off I can't believe you never noticed the little tab tha keeps the nut tight, if you can't figure out how to bent it out, then get the axle done by a pro.
If the nut is seized on, then you may have to cut it off with a cut off tool, just be sure you have a replacement nut for the new axle.

When you do get the nut off, and the front end apart and the axle out of the hub, you'll have to wedge a screw driver up in between the axle and the tranny to pop it out, once you do this tranny fluid will leak out, so be prepared. ;)



i've never once had tranny fluid leak out when i changed an axle??????
I don't know, always does for me?

projekteg 03-22-2004 02:11 PM
Re:axle problem
 
maybe there was none in there and that's why my tranny was grinding :-X ;)

Carnesd 03-22-2004 03:14 PM
Re:axle problem
 
I broke two breaker bars on a damn axle nut. My friend loaned me an electric impact wrench and it came right off.
Go to wal-mart and look in the automotive section, they've got an electric impact wrench for like $20, then take it back when your done. Wal mart will take anything back.

m76 03-22-2004 03:36 PM
Re:axle problem
 
Thanks i'll go an get one.

crx2fast 03-22-2004 06:20 PM
Re:axle problem
 
so m76 you get it off yet?

projekteg 03-22-2004 08:27 PM
Re:axle problem
 
Originally Posted by crx2fast
so m76 you get it off yet?
i doubt it ;)


All times are GMT -5. The time now is 03:55 AM.
Page 3 of 5
1
2
3
4
5
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands