axle problem
 

:(I tried changing my left axle but couldn't pull off the nut. Does anyone know what I'm doing wrong?

Re:axle problem
 

what nut are you talking about. the one when you take of the tire. that big ass one? if thats the one, your gonna need a hefty breaker bar. i used a 4 foot bar, and just stand on it. she'l come loose. if thats the nut your talking about :-\

Re:axle problem
 

Well a couple things, ur either using the wrong tools, or ur underestimatinghow tight that thing is really on there. If it factory tight, you may need 2 people to handle it. Get 1 long ass strong breaker bar and use a strong ratchet (craftman or snap on), and then tug away at that thing, itll come. just make sure u have the right socket on there.

Re:axle problem
 

Yes when I take off the rim. It's a 32mm do i need a airgun? Yes i do have a craftman . but a friend of mine told me to unsteak the nut w/ a flat head screw driver.I don't know how.I tried standing on the socket also.

Re:axle problem
 

'unsteak' just means to pop out the little piece that they hammer down to keep it locked to the axle, not all of them are steaked all the time (like if some one already changed it before and didn't do it), if it is, you'll see what i'm talking about. but yeah, i usually use an air gun or stand on a breaker bar while some one else holds the break pedal.

Re:axle problem
 

if u have access to an air gun. that ---- will come off. i hate having to jump on a long ass breaker bar to make that ---- come off. got tired of breaking ratchets the air gun will take that ---- off mang

Re:axle problem
 

I don't see any type of clip in the nut . Thanks I'll use a breaker bar.Around how much is a breaker bar?

Re:axle problem
 

did u take the pin out. there's a pin they stick though it isnt there?

Re:axle problem
 

no, they just steak/stake it in to a little slot on the axle.

m76: a 2 ft. breaker bar can be had fairly cheap. just go to sears or something. just get some one to stand on the break pedal, then stand on the breaker (all or your weight) and lightly bounce on it, go ahead and spray some pb blaster on it or something while you run to get a breaker bar, or just find a piece of metal pipe that will fit around you ratchet as an extension instead of buying a breaker bar, but then you risk breaking your ratchet :-\

Re:axle problem
 

i don't see any pin so i'm going to try the breaker bar.