HomemadeTurbo - DIY Turbo Forum
Page 3 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   1.apoligize to hotrex 2. I called SRP tech and they laughed at me (https://www.homemadeturbo.com/general-discussion-6/1-apoligize-hotrex-2-i-called-srp-tech-they-laughed-me-30881/)

SkunT 12-02-2004 12:33 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
as said once before, stay the ---- out of it. i could give 2 shits what you think. ::)

and i havet pulled the rest of the motor apart, and if you had read the other threads, you would see that the same thing is in all 4 pistons. ;)

its the way its suspossed to be straight from the horses mouth. (SRP)

projekteg 12-02-2004 12:35 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
Originally Posted by sccaeg
when more money comes, the head goes in to be re-worked ;)

then its just missin sleeves. ;)

if you waste 800 bucks to sleeve a d series, may god have mercy on your soul :P

AgentMurdoc 12-02-2004 12:37 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
don't chew me out on this frank, but are you planning to sleeve this block too?

SkunT 12-02-2004 12:43 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
---- no im not sleevin it.

forged internals/a big turbo/nice manifold/good FM (cough kevin cough) and a good flowing head will be plenty. ;)

Spenser 12-02-2004 12:53 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
Originally Posted by sccaeg
as said once before, stay the ---- out of it. i could give 2 shits what you think. ::)

and i havet pulled the rest of the motor apart, and if you had read the other threads, you would see that the same thing is in all 4 pistons. ;)

its the way its suspossed to be straight from the horses mouth. (SRP)
don't ------- roll your eyes at me. Of course you care what we think, otherwise you wouldn't have a thread like this.

dragon 12-02-2004 12:54 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
(grabs popcorn)

SkunT 12-02-2004 12:55 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
::)



everyone havin a good day, I am!

2 more hours and I go home!-then im BBQ'n tonite. ;D








fucker.

nonvtec 12-02-2004 12:56 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
If they were high silicon they wouldnt expand at all and you wouldnt be able to see the rings. Because they are low silicon and forged they expand like crazy and you have to have high clearance. Yes, these are low silicon, to whoever asked that question.

TekPhobia 12-02-2004 12:59 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
Originally Posted by ghettoturbo
Originally Posted by TekPhobia
So I'm guessing the SRP slugs are 2618 forgings (low-silicon).

-Tim
i was under the impression that they were high-silicon and thats why they were weaker. Anyway, i still think that one cylinder has too much play just by the looks of it, the other ones werent like that were they?
High-silicon (4032 alloy) pistons are more brittle. Their thermal coefficient of expansion is lower which allows for tighter clearances. If there's large clearance (enough to wiggle a piston) then they're low-silicon pistons with a higher thermal coefficient of expansion. That would be the 2618 alloy.

-Tim

Donald125 12-02-2004 01:06 PM
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
 
really>?
i thought they are 9965 alloy?


All times are GMT -5. The time now is 02:33 AM.
Page 3 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands