1.apoligize to hotrex 2. I called SRP tech and they laughed at me
1. I must apoligize to hotex for making him out to be a bad guy. The motor is not fucked up, *refer to #2* I would however like to receive my other stuff, hes late on shipping, that was expacted, but he did tell me he shipped it when he in fact didnt. -as long as I get my ---- soon, im happy. ;)
refer to this thread 2. I just got off the phone with SRP tech guys. They laughed at me. I described to him my problem and the guy (tony i think his name was) said in a chuckling manner "when looking down on a piston you SHOULD see a ring. When you look at it from the bottom, you SHOULD NOT be able to see the rings. Piston expansion is huge on SRP pistons. Alot of people break ringlands because they dont leave any room for 'piston slap' and heat expansion, therefore breaking the weakest part of the piston" I said, "I can accually move the piston back and forth in the cyl" his reply "duah (laughing), thats normal, you need that" he said the only way you can really figure out if its ok, to have it measured. (well no ----) but he said everything I described to him sounds 100% normal to him. So I guess, i will replace the bearings and go with it. I thought this is good info to share. *hince why maybe some people are breaking ring lands. ??? |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
shoot first, ask questions later :)
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
thats what i was thinking when i looked at your motor, because i know when my uncle built his motor with forged internals the pistons had play and you could see a little bit of the rings
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
wow i bet that was a big releif. now you have a fully built d series ya!
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by slowpoke
shoot first, ask questions later :)
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
I thought this is good info to share. *hince why maybe some people are breaking ring lands. ??? |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by trebor_nordap
wow i bet that was a big releif. now you have a fully built d series ya!
semi built ;)
Originally Posted by djfob
Originally Posted by sccaeg
I thought this is good info to share. *hince why maybe some people are breaking ring lands. ??? i haven't heard of too many people breaking ringlands on forged pistons, cast is a different story ;) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
lol, it was built till your dumbass ripped it apart. Good job douchebag :P
The HMT lynch mod PWN3D your motor |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by Whitey
lol, it was built till your dumbass ripped it apart. Good job douchebag :P
The HMT lynch mod PWN3D your motor ohh well. |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
I thought this is good info to share. *hince why maybe some people are breaking ring lands. ???
Most people are breaking ringlands becuase we run stock pistons. Stealthmode is the only one so far to rape a set of forged pistons ;) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
So I'm guessing the SRP slugs are 2618 forgings (low-silicon).
-Tim |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
new rings and bearings and shes good as new.
300 hp to your face. :'( a tear has been brought to my eye |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by hotrex
:'( a tear has been brought to my eye
(isnt that why they put the teardrop under there eye) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
someone needs a E-hug :P
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
good to know the motor ain't shot. :)
good info for the rest of us peoples too, so we don't have to call and get laughed at. :P |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by projekteg
when more money comes, the head goes in to be re-worked ;) then its just missin sleeves. ;) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
why do people continue to by from hotrex? you know what his trck record is. if you know and you do it anyway i don't want to hear about it.
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by slowcivic X2
...anyway i don't want to hear about it.
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Ok I'm sorry, but I think you are incredibly stupid...
1. So far, according to you, only one piston has noticable piston to wall clearence. why is that 2. Those bearings shouldn't even be close to showing any wear yet, something else is wrong 3. you bought from hotrex, dumbass :P 8) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by TekPhobia
So I'm guessing the SRP slugs are 2618 forgings (low-silicon).
-Tim |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
as said once before, stay the ---- out of it. i could give 2 shits what you think. ::)
and i havet pulled the rest of the motor apart, and if you had read the other threads, you would see that the same thing is in all 4 pistons. ;) its the way its suspossed to be straight from the horses mouth. (SRP) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
when more money comes, the head goes in to be re-worked ;)
then its just missin sleeves. ;) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
don't chew me out on this frank, but are you planning to sleeve this block too?
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
---- no im not sleevin it.
forged internals/a big turbo/nice manifold/good FM (cough kevin cough) and a good flowing head will be plenty. ;) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
as said once before, stay the ---- out of it. i could give 2 shits what you think. ::)
and i havet pulled the rest of the motor apart, and if you had read the other threads, you would see that the same thing is in all 4 pistons. ;) its the way its suspossed to be straight from the horses mouth. (SRP) |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
(grabs popcorn)
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
::)
everyone havin a good day, I am! 2 more hours and I go home!-then im BBQ'n tonite. ;D fucker. |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
If they were high silicon they wouldnt expand at all and you wouldnt be able to see the rings. Because they are low silicon and forged they expand like crazy and you have to have high clearance. Yes, these are low silicon, to whoever asked that question.
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by ghettoturbo
Originally Posted by TekPhobia
So I'm guessing the SRP slugs are 2618 forgings (low-silicon).
-Tim -Tim |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
really>?
i thought they are 9965 alloy? |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by BlackDragon
(grabs popcorn)
to you people who are throwing useful info in this, i appreciate it. to all you others, screw you. the motor is being built the way it sits now. -im just gonna put new bearings in it and go with it. for some reason im really beleiving what the tech at SRP told me. :P |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
(isnt that why they put the teardrop under there eye)
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
And the truth shall set you free!
|
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by sccaeg
Originally Posted by hotrex
:'( a tear has been brought to my eye
(isnt that why they put the teardrop under there eye) If you turned Mexican you would be working your ass of right about now :P |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by d16forlife
If you turned Mexican you would be working your ass of right about now :P
that's not true, your mexican and you sit on your ass all day raffi :-* |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by SinisterCRX
Originally Posted by sccaeg
(isnt that why they put the teardrop under there eye)
I met a cute chick that had that, I knew mexican gangsters that had that, so I interpreted it as trouble and walked away. |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by AgentMurdoc
I met a cute chick that had that, I knew mexican gangsters that had that, so I interpreted it as trouble and walked away. |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by BlackDragon
Originally Posted by AgentMurdoc
I met a cute chick that had that, I knew mexican gangsters that had that, so I interpreted it as trouble and walked away. |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Originally Posted by projekteg
Originally Posted by d16forlife
If you turned Mexican you would be working your ass of right about now :P
that's not true, your mexican and you sit on your ass all day raffi :-* |
Re:1.apoligize to hotrex 2. I called SRP tech and they laughed at me
Raffi, your the ultimate example of how a beaner should be. ;)
You really do make me proud, son. :) |
All times are GMT -5. The time now is 01:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands