Zener Diode Mod to MAP sensor signal
#1
Zener Diode Mod to MAP sensor signal
Does anyone know about this method of tricking the ecu into not reading boost or lowering the voltage? Also is our sensors a 1 bar or 2 bar? I just found out about and curious to try it so fill me in on ur opinions and info. THANX
#2
Re:Zener Diode Mod to MAP sensor signal
Heres a write up i found about it......
http://www.thedodgegarage.com/turbo_map.html
http://www.thedodgegarage.com/turbo_map.html
#3
Re:Zener Diode Mod to MAP sensor signal
Originally Posted by TurboCivicSiR21
Heres a write up i found about it......
http://www.thedodgegarage.com/turbo_map.html
http://www.thedodgegarage.com/turbo_map.html
The stock MAP sensor on Civics is rated at 1 BAR.
#4
Re:Zener Diode Mod to MAP sensor signal
No problem man so its 1 bar cus i seen someone said somwhere else it was 1.75. Anyhow are u goin with the 4.3 volt diode as well? im gonna go out and buy one today since i see its only a few bux at radio shack so its worth a try let me know how it goes for u as well.
#6
Re:Zener Diode Mod to MAP sensor signal
What you're reffering to has been done many times before...It's just a Map hack...
Trailor park hack, AFC hack stuff...
It's ok, but if you got a SiR I wouldn't do it...you have the cash for an SiR and you're doing a hack?? just sad....it's risky and not reliable
Trailor park hack, AFC hack stuff...
It's ok, but if you got a SiR I wouldn't do it...you have the cash for an SiR and you're doing a hack?? just sad....it's risky and not reliable
#7
Re:Zener Diode Mod to MAP sensor signal
Originally Posted by TurboCivicSiR21
No problem man so its 1 bar cus i seen someone said somwhere else it was 1.75. Anyhow are u goin with the 4.3 volt diode as well? im gonna go out and buy one today since i see its only a few bux at radio shack so its worth a try let me know how it goes for u as well.
#9
Re:Zener Diode Mod to MAP sensor signal
Originally Posted by Semnos
1 bar is 14.5-14.7 psi....
1.75 bar is about 25psi
You got to remember that our atmosphere is 1 bar or 1.1 bar already... you got to deduct that from the map sensor range...
1.75 bar is about 25psi
You got to remember that our atmosphere is 1 bar or 1.1 bar already... you got to deduct that from the map sensor range...
#10
Re:Zener Diode Mod to MAP sensor signal
Originally Posted by Semnos
What you're reffering to has been done many times before...It's just a Map hack...
Trailor park hack, AFC hack stuff...
It's ok, but if you got a SiR I wouldn't do it...you have the cash for an SiR and you're doing a hack?? just sad....it's risky and not reliable
Trailor park hack, AFC hack stuff...
It's ok, but if you got a SiR I wouldn't do it...you have the cash for an SiR and you're doing a hack?? just sad....it's risky and not reliable