ShoPow

Is anybody running these two together. I remember reading something along time ago that it didnt fit right because of the oil thing being bigger on the back of the block or something and haveing to use an adaptor or something. But I cant seem to find it. Any help would be great thanks.

Carnesd

It'll work, just takes some finness. You wouldn't be able use both oil ports on the fitting but you can get the oil feed line in there. It was the hardest part of my install. It will work though.

troyb

Yeah if its the DOHC ZC there is an oil cooler where the oil filter goes on and you will need to use an adaptor.. I just finished my project with the ZC and I had to order the Z10-6002 Stainless Steel 1/8 BSPT x 1/8 NPT Fitting from Z10 motor sports and used it as an extension and it fit perfectly.. I used this adaptor in the block and then the tunertoys fitting into that and I am getting no leaks at all.. Just make sure you put teflon tape on every connection. Spiceisler also did the same and thats probably where you seen it before. Here is a link to his setup and there is a picture of the back of the block where he used the adaptor.....
http://d-series.org/viewtopic.php?t=3539

ShoPow

Ok thanks for the help guys. I knew I had seen something before but just couldnt remember. Thanks again.

-ShoPow