yeah yeah montreal turbo
#1
yeah yeah montreal turbo
the installation has just finished.... were on the test
we used a te04 from dodge shadow but the vortech fmu doesnt worked... (the car started but dies after a 30-60 seconds)
so we putted back the stock fuel press reg...(this is why it cuts in the video) Any ideas or tips on what we could do ?
it is a 1992 corolla station whoaaa lol
http://membres.lycos.fr/aligattitude/1/ its the MOV00593 file...
thanks
mk2
we used a te04 from dodge shadow but the vortech fmu doesnt worked... (the car started but dies after a 30-60 seconds)
so we putted back the stock fuel press reg...(this is why it cuts in the video) Any ideas or tips on what we could do ?
it is a 1992 corolla station whoaaa lol
http://membres.lycos.fr/aligattitude/1/ its the MOV00593 file...
thanks
mk2
#2
Re: yeah yeah montreal turbo
Did you hook up the lines the correct way?
edit- I just watched that video and you really need to deal with the fuel situation before any more of that if you care about the motor lasting more than 1 day.Also put on the ebrake next time and melt the tires clean off.
edit- I just watched that video and you really need to deal with the fuel situation before any more of that if you care about the motor lasting more than 1 day.Also put on the ebrake next time and melt the tires clean off.
#3
Re: yeah yeah montreal turbo
yes the line was hooked up correctly when tried the fmu.
we dont care about the motor... running at 15 lbs of boost (before it cuts hard) ...
on the video the gaz pedal was not push hard (maybe 5 or 6 lbs since the boost gauge died)
we will try to figure out whats wrong with the fmu....(maybe thats it)
handbrake dont work hehe
we dont care about the motor... running at 15 lbs of boost (before it cuts hard) ...
on the video the gaz pedal was not push hard (maybe 5 or 6 lbs since the boost gauge died)
we will try to figure out whats wrong with the fmu....(maybe thats it)
handbrake dont work hehe
Thread
Thread Starter
Forum
Replies
Last Post
d15b7underpsi
Hybrid/Tech
18
10-26-2006 11:10 AM