Y7 Rods
#1
Y7 Rods
I was told if i was gonna turbo a Y7 on stock internals, that i would be bending rods with in the first month, i dont that would be the case since i am only planning on running 8 psi at the track and 5 for daily driving.
I was also told adding ne thing more then 30 h.p. to a d-series would also cause rods to bend.
I was also told adding ne thing more then 30 h.p. to a d-series would also cause rods to bend.
#5
Re:Y7 Rods
i ran 7.5-8psi daily for 6000 miles...running 9psi now. waiting to get it on a dyno to see what hp i'm getting. w/b tuned with a techedge at 9psi. stock rods are good for about 200whp so i've heard. i'm thinking i'm at about 180-190whp now.
#7
Re:Y7 Rods
Originally Posted by ghettoturbo
i ran 13psi daily for about two months....i figure i was at about 230 hp, but thats just a guess. If you can afford a new motor when it blows (they are cheap), dont be scared. Mine never blew, i just pulled it to build it up a little
#10
Re:Y7 Rods
The rods aren't weak, but they aren't that strong either.
My D16Y7 flattened connecting bearings, but this was entirely because I did not pay attention to the detonation.
The motor lasted almost 5 months with pinging at 5-6 psi daily, with me hot rodding around.
That should tell you something.
My D16Y7 flattened connecting bearings, but this was entirely because I did not pay attention to the detonation.
The motor lasted almost 5 months with pinging at 5-6 psi daily, with me hot rodding around.
That should tell you something.
Thread
Thread Starter
Forum
Replies
Last Post
97spydagst
Turbo Parts For Sale
30
05-28-2006 01:30 PM
n2o_2k
Turbo Parts For Sale
10
04-16-2005 08:16 PM