wiring inline fuel pump
 

i need to wire up my intank pump, where do i need to tap the power wires into? any suggestions

Re:wiring inline fuel pump
 

If you're replacing your old in-tank pump just use the stock wiring.

Re:wiring inline fuel pump
 

im going to run both

Re:wiring inline fuel pump
 

Been there, done that. Just get a good in-tank. I know thats not what you're question but just tryin to save you some hassle.

Re:wiring inline fuel pump
 

It doesn't matter if you're runnin one or both, use the stock wiring. Just splice off the old pump.

Re:wiring inline fuel pump
 

where does the intank wire go? i dont want to run wire all the way to the rear of the car, do they go into a harness that i can splice into?

Re:wiring inline fuel pump
 

Just look at the wires going into your old pump. You can splice into them anywhere you want.

Re:wiring inline fuel pump
 

i tapped into the yelow and black wire on teh fuel pump,

now im my car is acting up though, i will have to diagnose it tommorow, something to do with the ground, can someone show me where they mounted there intank fuel pump and where the ground cable is going.

Re:wiring inline fuel pump
 

do you mean inline even though you keep writing intank?...dont power two pumps off of the one wire unless you are using a relay.

Re:wiring inline fuel pump
 

i gotta agree with ghettoturbo. that wire is meant for 1 pump not 2.

find the ACC wire under your dash (turns on with ignition) and wire up a relay that will support the amperage the pump will pull.