Im thinking of doing a custom turbo setup for my accord, but cant seem to find any company other than F-Max and Drag that makes turbo manifolds for the F23, and some people said they wont sell the manifold by itself , so does any1 know what company makes F23 turbo manifolds that can fit a T3?

 

88 turbo crx's company does
send me a pm

 

someone correct me if i'm wrong, but i think a turbo eclipse (90-9 manifold bolts up, but needs to be portmatched... you can always compare manifold gaskets from your accord and the eclipses...
If it works then you can use any DSM turbo!

hth..
phil

 

It bolts up, but it points the turbo directly into the block (as far as I have heard) i'm pretty sure it needs a lotof customization to get it to work. I say buy, or make one

 

it does take quite a bit of modifications. As i do beleive for the F23's you can use the H23 turbo manifold patter if that helps you out at all. F23, H23, and F22B(JDM dual cam) share the same exhaust flanges.

 

i made my turbo manifold for my 95 accord ex (f22). is not that hard, it just take time. i got all the information from HMT. it seem to work pretty good so far. right now i'm running 9 psi on my accord.

 

the f22a1 is differet than the f22b, exhuast ports 2 and 3 are a little closer together on the f22b. but I did take my f22a1 manifold and it bolted up to my h23 with no problems.