Where to tap cooling line from?
#1
Where to tap cooling line from?
Might sound stupid for someone who almost complete his turbo, but where the @$@# are you getting your coolan line from and back to ?
I don't feel confortable drilling in the rad at all !
so where should it pickup and where should it go back to ?
Thanks
I don't feel confortable drilling in the rad at all !
so where should it pickup and where should it go back to ?
Thanks
#5
Guest
Posts: n/a
Re:Where to tap cooling line from?
No, your throttle body has a mechanical idle air control controller that has coolant running through it. Then it goes to the eletronic idle air control valve on the back of the intake manifold.
Interrupt the lin going into the mechanical idle air control valve underneath of your throttle body, run it your turbo, then run it back to the mechanical IAC..
Should be that easy.. Use some fuel hose from O'Reilly's and some hose clamps..
Interrupt the lin going into the mechanical idle air control valve underneath of your throttle body, run it your turbo, then run it back to the mechanical IAC..
Should be that easy.. Use some fuel hose from O'Reilly's and some hose clamps..
Thread
Thread Starter
Forum
Replies
Last Post