where to put dohc zc oil feed line, added pics
#1
where to put dohc zc oil feed line, added pics
ok so i know you put the oil feed line on the pressure sender, but there is no way i can get that ---- out.
i can't get to it, there is all kinds of stuff in the way.
i think i would have to take the head off to reach it.
any other ideas of where to put this thing.
i can't get to it, there is all kinds of stuff in the way.
i think i would have to take the head off to reach it.
any other ideas of where to put this thing.
#3
Re: where to put dohc zc oil feed line, any place besides pressure sender.
ok so i got the sender off, but the reason i couldn't get it off will not allow my tee to fit.
the zc has some kind of oil cooler on it, plus the black box pcv thing.
i've decided to go to a place tomorrow and get an extender so the tee is a few inches further from the block.
the zc has some kind of oil cooler on it, plus the black box pcv thing.
i've decided to go to a place tomorrow and get an extender so the tee is a few inches further from the block.
#5
Re: where to put dohc zc oil feed line, any place besides pressure sender.
does the obd1 dohc zc have an oil cooler where the filter goes? and the black pcv box?
cause there is no way in hell it'll fit without an extension. i'll take a pic after i get the extension and everything in.
cause there is no way in hell it'll fit without an extension. i'll take a pic after i get the extension and everything in.
#6
Re: where to put dohc zc oil feed line, any place besides pressure sender.
if it wont fit without an extension (which i disagree with) you should run a hose from the sender to your firewall, and put the T there. If you have a long erection sticking out of the back of your block its gonna rattle itself out and take your threads with it
#7
Re: where to put dohc zc oil feed line, any place besides pressure sender.
Originally Posted by danz
if it wont fit without an extension (which i disagree with) you should run a hose from the sender to your firewall, and put the T there. If you have a long erection sticking out of the back of your block its gonna rattle itself out and take your threads with it
#8
Re: where to put dohc zc oil feed line, any place besides pressure sender.
Originally Posted by danz
if it wont fit without an extension (which i disagree with) you should run a hose from the sender to your firewall, and put the T there. If you have a long erection sticking out of the back of your block its gonna rattle itself out and take your threads with it
so you say i need to run a line to my firewall and put the tee there.
#9
Re: where to put dohc zc oil feed line, any place besides pressure sender.
here are some pics of what is in the way. you can see the coolant line coming out to the left of the pressure sender hole. that is a hard line and will not move for a tee to fit. on the other side is the black box with hoses coming out of it. below is the oil cooler that came on the dohc zc. all i need is about 2 inches of extension for the tee to clear all that ----.
so you guys say no extension, and just go with a firewall mount.
so you guys say no extension, and just go with a firewall mount.