What turbo will give me 300hp at 10psi on a b16?
 

Like the tittle says, which turbo will give me 300hp at 10psi on a 99si b16? Will a t3/t4 get me there at 10psi? I don't want to run higher than 12psi cause I'm using a vafc and it's a stock block w/dsm 450s.Thanks.

Re: What turbo will give me 300hp at 10psi on a b16?
 

lol your funny guey !!

Re: What turbo will give me 300hp at 10psi on a b16?
 

The car is already turbo charged, but I'm using a t3 .60 and I get 246hp at 10psi. I want to take it to the next level 300hp.

Re: What turbo will give me 300hp at 10psi on a b16?
 

china has the answer for you

Re: What turbo will give me 300hp at 10psi on a b16?
 

just up the boost and chip your ecu, 300whp with a vafc isnt real easy

Re: What turbo will give me 300hp at 10psi on a b16?
 

full race :1

Re: What turbo will give me 300hp at 10psi on a b16?
 

OP, regardless of what you get, I'll give you $50 for your old turbo. There's a really cool guy selling a GT12 BB turbo in the For Sale forum!

Re: What turbo will give me 300hp at 10psi on a b16?
 

14b

Re: What turbo will give me 300hp at 10psi on a b16?
 

Thanks for all your help guys :1

Re: What turbo will give me 300hp at 10psi on a b16?
 

Did you expect anything less??

Re: What turbo will give me 300hp at 10psi on a b16?
 

I expected somebody with a b16 set up pushing 300hp would post up, but that didn't happen :8

Re: What turbo will give me 300hp at 10psi on a b16?
 

I think a t3 to4e would prob get you pretty close. a t3 is a lil small for a b16

Re: What turbo will give me 300hp at 10psi on a b16?
 

:8

Re: What turbo will give me 300hp at 10psi on a b16?
 

the turbo that im selling in the for sale section. :y :y its large enough for 300 hp.

Re: What turbo will give me 300hp at 10psi on a b16?
 

use a holset hx35 there on ebay for $150 +

Re: What turbo will give me 300hp at 10psi on a b16?
 

a mack truck turbo like me

Re: What turbo will give me 300hp at 10psi on a b16?
 

A good tune would prolly get you closer.

Re: What turbo will give me 300hp at 10psi on a b16?
 

+1

One of their kits will get you there for sure.

Re: What turbo will give me 300hp at 10psi on a b16?
 

T3/T4 50 trim .63 A/R possibly would at those boost levels. If you wouldn't mind switching to Mitsubishi, possibly a Big 16G, better yet a TD06-20G.

But I'm with the boys. If you're baller status, go full race. I'd imaging their GT28R would get you there.

Re: What turbo will give me 300hp at 10psi on a b16?
 

Ya full race 4 life yo. That black crx on pinks I heard has there new gen get real log manifold

Re: What turbo will give me 300hp at 10psi on a b16?
 

full race stickers automatically add 300 hp.
and when V-TAK kicks in.... hold on!!

Re: What turbo will give me 300hp at 10psi on a b16?
 

i vote log...

Re: What turbo will give me 300hp at 10psi on a b16?
 

and the hack is wack get somthing real... ::) :y

Re: What turbo will give me 300hp at 10psi on a b16?
 

A 20g at 10psi will not net you 300hp on anybody's dyno. You know not what you speak of.

---- Full-Rice. :3

Re: What turbo will give me 300hp at 10psi on a b16?
 

Careful Rob, that guy is a DSM expert and knows what he is talking about! He'll eat you alive in an e-argument. :o

Re: What turbo will give me 300hp at 10psi on a b16?
 

http://cgi.ebay.com/ebaymotors/ws/eB...158550562&rd=1

that'll get ya 300hp.. :y :y

Re: What turbo will give me 300hp at 10psi on a b16?
 

lol no way, that thing at 10 psi on a b16 would hit maybe 240 at 8200 no power before 7500 ;) :P


dsm guy you are a jackass

Re: What turbo will give me 300hp at 10psi on a b16?
 

:-[

Eh, it was worth a try. A TD06H-20G is good for 475hp on a 2.0L DSM. But there I go again, we're talking about a B-16A @ 10psi, not a 4G63 @ 25psi. Allow me to shove a pencil through my ear and break it off.

Re: What turbo will give me 300hp at 10psi on a b16?
 

I dislike 20G's. All small shaft turbos are failure.

Re: What turbo will give me 300hp at 10psi on a b16?
 

i think he will need to raise redline up to 10.000 rpm for to boost just 1 psi with that turbo.

talk with Blastperformance guy! :6

Full-race is g$$d!

Re: What turbo will give me 300hp at 10psi on a b16?
 

GT3251e would be a good turbo for you...its basically a modified 57 trim. It has a smaller compressor wheel so it spools faster on the B16, but will still make 300whp on 10psi. I have a GT3255b and made 315/216 @ 10psi

Re: What turbo will give me 300hp at 10psi on a b16?
 

35R :6

Re: What turbo will give me 300hp at 10psi on a b16?
 

30R would be good.

Re: What turbo will give me 300hp at 10psi on a b16?
 

GT30R, GT35R, etc, are overpriced garbage with short lifespans. Stop paying attention to what magazines are trying to sell you and develop an opinion of your own based on real world experience.

Re: What turbo will give me 300hp at 10psi on a b16?
 

OMG...someone here isn't stupid. Thanks for saying that! I cant stand how everyone brainlessly suggests "GT35r or GT30r" because they read it was the "magic turbo" in one of their ricer, F&F style magazines. I can see the GT30r suggestion somewhat for his power goals, but not really....and especially not the GT35r. You'd have to run 6-7psi on it and that would be a huge waste of money w/ unneccessary lag.

I'm sticking to my earlier suggestion. I think the GT3251e would be a good turbo for you. It is a journal bearing turbo that closely resembles a 57trim in looks, price and performance. It does spool a little faster because, as i mentioned in my last post, it has a smaller compressor wheel. If you want, go on Honda-tech and PM The Shodan. I bought my GT3255b from him...he's a great guy and will help you out

Re: What turbo will give me 300hp at 10psi on a b16?
 

Get the ---- out of here with that DSM bullshit, god damn it.

Soichiro would turn over in his grave if he knew you were recommending people put puny Mitsubishi turbos on B series motors.

Re: What turbo will give me 300hp at 10psi on a b16?
 

on a b16, lots of turbos can work and give you 300 hp easy.

for a fast spooling turbo that spools up as quick as a gt28R, costs 1/3 of the price, is rebuildable and equipped with a t3 flange, i would suggest:

t3/t04B 54 trim, stage 1, .63/.60 a/r, watercooled.
you could also try the t3/t04e 46 trim, stage 1, .63/.70 a/r, watercooled.

I had many reports of as much as 300-340 whp with those and i never eared anyone complaining about spool up.

Re: What turbo will give me 300hp at 10psi on a b16?
 

At what psi would that t3/t04 get me to 300hp? thanks.

Re: What turbo will give me 300hp at 10psi on a b16?
 

figure the cfm of your head x the amount of boost you want to run / by 4 then add that ontop of your injector cc's x 0 and thats how much boost pressure you'll need.

Re: What turbo will give me 300hp at 10psi on a b16?
 

How is this so hard to understand.. Bigger turbo and 10psi to make 300 or smaller turbo and 14+psi to make 300, it doesnt matter. Both can blow your ---- up without engine management. With crome as cheap as it is I dont really know what to say