i'm using 1/4 inch id fuel line for my oil feed line. i know it can handle the psi, but what about the temp. it seems to get pretty hot. i figure it should be ok since heater/coolant hose get's pretty hot. i just want to be sure. it isn't anywhere near touching the downpipe or manifold. i figure steel braded hose is the same thing, but with steel braid over it...right?

 

found it...i have sae 30r7 that will hold up to 257 degree and 300 psi burst pressure, but i'm going to switch to fuel injection line (that is what i thought i was getting) which is sae 30r9 that will hold up to 275 degree and 500 psi burst pressure. unless, the stainless braid -an stuff is the same price.