lazy/dumb maybe u should take your own advice and read what i wrote


i did search i found very little on the 13g

 

It's definitely a 13g, also referred to as the 13b, but it has a g-series dual finned compressor wheel, so G it is. There are other turbos that are TDO4HL, but none have the same flanges as the 14b except the 13g. Of course the hotside is a 5cm whereas the 14b is a 6cm which makes the exhaust inlet smaller and the turbine outlet smaller. It's a great turbo for 11psi and fast spool. It's a little better than a DSM T25. The T25 always takes a ---- above 12psi, but the 13g can eek out a little more reliably.

 

http://www.turbomaster.info/eng/cata...i&pagina=TDO4H

must i share all my favorite websites with these nogs?



try checking the number stamped into the flat part on the compressor housing and search, yes again i said search, the list above. sorry my previous post wasn't enough information to spoon-feed whoever the answer. hope this post helps and makes up for my apparent lack of knowledge.

 

that was a way better link then the first two, good info