what about T28 for ZC DOHC
#1
what about T28 for ZC DOHC
finally i got T28 from SR2DET black top nissan engine turbocharger, needs rebuild kit (where get one?) i think should be good for my car, but not sure at all, what do u guys think? my goal is like 180-195hp (i hope tune it very weel ).
what specs has it?
could be this?
TURBINE SPECS: T28
.86 A/R Housing
79 Trim Wheel
COMPRESSOR SPECS: T3
.60 A/R Housing
60 Trim Wheel
Compressor Flow: 33 LB/MIN
:1
if so, that AR turbine is little big to me..¿?
what specs has it?
could be this?
TURBINE SPECS: T28
.86 A/R Housing
79 Trim Wheel
COMPRESSOR SPECS: T3
.60 A/R Housing
60 Trim Wheel
Compressor Flow: 33 LB/MIN
:1
if so, that AR turbine is little big to me..¿?
#2
Re: what about T28 for ZC DOHC
First of all if you have a T28 from an JDM S14/S15 SR20DET those type are ball bearing turbo and rebuilt kits are not available other a new CHRA. Some shops may do rebuilt on BB turbo but IMO it's not worth it. Assuming it's ok I have almost similar setup but mine is an SR T25 and when fitting the turbo it was tricky for turbo will need be clocked and its make it harder to retain it's internal wastegate function. Good news is that the stock turbo elbow will clear perfectly. Overall SR20DET T25/T28 would be an excellent mild turbo but would defintely require using external wastegate,Unless you find a good way of mounting the wastegate. For now I sold my T25 and just rebuilded my 14b instead just to much hassle. GL with your build.
#3
Re: what about T28 for ZC DOHC
Ive got a t3 42 48 on my DOHC with the HF/external gate setup and I think it feels ok, but the turbo could be a little larger for stronger top end.
T25 def wouldnt cut it on the DOHC ZC and I dont know much about the T28s. T3s are just so common so why the hell not
T25 def wouldnt cut it on the DOHC ZC and I dont know much about the T28s. T3s are just so common so why the hell not
#5
Re: what about T28 for ZC DOHC
Originally Posted by losesomethinbra
T25 def wouldnt cut it on the DOHC ZC and I dont know much about the T28s.
#7
Re: what about T28 for ZC DOHC
Originally Posted by guscivic
wouldnt an HF work just fine?
#8
Re: what about T28 for ZC DOHC
it isnt JDM , it's bb i almost sure, S15 comes with bb here to Europe, i think.
here a pic of mine with T28 and GT-RS HKS (garret) (lol) , i dont know about if size is good for my ZC DOHC , anyway ill use it, uses T3 flange btw
id like run with External WG of course..
ive seen rebuild kis for T25/T28 turbos in Ebay, looks not bad (i did think rebuild kit comes with more stuff)
was wondering about when ill get full boost on my stock engine :1
ill make my own log mani...
here a pic of mine with T28 and GT-RS HKS (garret) (lol) , i dont know about if size is good for my ZC DOHC , anyway ill use it, uses T3 flange btw
id like run with External WG of course..
ive seen rebuild kis for T25/T28 turbos in Ebay, looks not bad (i did think rebuild kit comes with more stuff)
was wondering about when ill get full boost on my stock engine :1
ill make my own log mani...