were to tap in for water to my turbo?
09-12-2003, 12:35 PM
#1
1.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 571
were to tap in for water to my turbo?
Hey weres everyone tapping in for there water in and out for there turbo? The radiator maybe? Well just lemme know! Thanks for the info. Nick
oh yah also will supplying the trubo with water contribute to exhaust house crackings in any way scince of the heat and the wwater hitting it!
oh yah also will supplying the trubo with water contribute to exhaust house crackings in any way scince of the heat and the wwater hitting it!
09-12-2003, 03:45 PM
#4
Guest
Posts: n/a
Re:were to tap in for water to my turbo?
it seems to make more since to tap the water line going out of the throttle body so your not contributing more heat to the throttle body and to the intake air. also doesnt the ecu alter the fuel/timing based on partially the temp of the water at the throttle body?
just a stab at it?
just a stab at it?
09-13-2003, 01:34 AM
#6
1.5 BAR
Join Date: May 2003
Posts: 808
Re:were to tap in for water to my turbo?
if ur sending the coolent to the tb(wich eventually ends up in the eacv)i should just make ur car warm up faster cause the eacv will close faster do to hotter water right
witch if thats the cass sweet cause my car idles kind fast till it gets warm then it purs like a kittin
witch if thats the cass sweet cause my car idles kind fast till it gets warm then it purs like a kittin
09-14-2003, 09:28 PM
#7
1.0 BAR
Join Date: Jun 2003
Posts: 278
Re:were to tap in for water to my turbo?
For my setup we just used the upper and lower Radiator lines.. got some nice T's from Lowe's.. plastic stuff, two 1.5inch outlets and a third outlet that screwed in that was the size of the water lines.. works pretty well, but the lines are so damn hot.
Thread
Thread Starter
Forum
Replies
Last Post
EJ1All-Star
Forced Induction
6
03-21-2007 10:55 PM
