"Water" in the catch can
Thread Starter
0.0 BAR
Joined: Jan 2003
Posts: 26
"Water" in the catch can
I've got a d16a6 stock engine that I'm tuning.
I have a hose from the back of the valve cover, teed with a hose from the intake where the PCV was, into a McKinney racing catch can. The other side of the can goes to the turbo's air intake.
When I opened up the catch can, it looked like there was water in it -- didn't look like antifreeze, but it must be right?
The water must have come from either the valve cover or the intake.
Nuked head gasket? Any easy way to diagnose wtf is going on? It doesn't look like there is oil in the radiator overflow....
Thoughts appreciated.
John
I have a hose from the back of the valve cover, teed with a hose from the intake where the PCV was, into a McKinney racing catch can. The other side of the can goes to the turbo's air intake.
When I opened up the catch can, it looked like there was water in it -- didn't look like antifreeze, but it must be right?
The water must have come from either the valve cover or the intake.
Nuked head gasket? Any easy way to diagnose wtf is going on? It doesn't look like there is oil in the radiator overflow....
Thoughts appreciated.
John
Thread
Thread Starter
Forum
Replies
Last Post
70Challenger
Wanted
1
Jun 22, 2006 01:56 AM
willahlborn
Forced Induction
1
Oct 24, 2003 04:02 PM
