Vacuume Lines and Boost Controller
#1
Vacuume Lines and Boost Controller
just a quick question about vacuume lines on turbo, i have MAF and TB before turbo and intercooler so it might be different then what most people are doing....
anyways BOV vacuume line connects to intake manifold and wastegasket connects to port right after turbo outlet... so how does a manual boost controller connect im thinking that i have to tap into the line between BOV and manifold run it to controller **** then from there to wastegasket and plug the other vacumme port located after turbo m I correct or m i making this confussing
could somebody tell me how you guys connect your vacuume lines on your setups(with or w/o controller)
Osman "my first post here" Nuric
#2
Re:Vacuume Lines and Boost Controller
The wastegate actuator can get hooked up 2 ways.
1 from the port off the compressor housing
2 from intake manifold (this will spool faster)
a manual boost controller will go on the vacuum line inbetween the port off the compressor/intake manifold to the wastegate actuator.
its pretty simple
Jeff
1 from the port off the compressor housing
2 from intake manifold (this will spool faster)
a manual boost controller will go on the vacuum line inbetween the port off the compressor/intake manifold to the wastegate actuator.
its pretty simple
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
robs99si
Forced Induction
13
09-13-2004 09:27 PM
reinhardsen
Forced Induction
2
04-11-2003 12:11 AM