Just wondering if the nipple at the throttle body that activated the charcoal canister by vacuum is a good place to connect the BOV to. This is on a 90 Civic Si D16A6. Thanks for any and all replies.

 

anything past the tb.if thats the red hose i cant remember if it picks up past the butterfly of like half and half just t of th dashpot diaphram vac hose

 

I use a T at the fuel pressure regulator

 

I swear by putting the BOV off the brake booster. Bigger most acurate vac source. And makes the BOV loud as ----. ;P

 

man, i saw this thing the other day, it was a vaccum source outlet basically. you plug it into a vaccum source, and it had like six holes to tap in to. it looked awesome and you don't have to worry about t'ing everting and looking all messy. i should have saved the link, but i think it was made by "golden eagle" or some ---- like that.

 

Yeah. You can also go into a shop in the airtool section. And buy the same thing for $3. Then you tap your fittings in.

 

Projecteg, lets see a write up and pics of the brake booster vac source

 

http://www.honda-tech.com/zerothread?id=496648 Heres your howto. You can find this much cheaper at your hardware store in the air tools section.

 

The "vacum tree" off 87-93 5.0 mustangs work too.