vacum sources for turbo stuff
Guest
Posts: n/a
Re: vacum sources for turbo stuff
I run my boost gauge from a T off the FPR line.
Boost controller goes inline with the wastegate, which I run off the compressor housing of the turbo. If you don't have a fitting on your turbo see below.
My BOV is run from the stock PCV valve line off the intake manifold. You don't need no ------ PCV with a turbo, so make use of that fat port on the intake manifold. T off it and run your wastegate if necessary.
Boost controller goes inline with the wastegate, which I run off the compressor housing of the turbo. If you don't have a fitting on your turbo see below.
My BOV is run from the stock PCV valve line off the intake manifold. You don't need no ------ PCV with a turbo, so make use of that fat port on the intake manifold. T off it and run your wastegate if necessary.
Guest
Posts: n/a
Re: vacum sources for turbo stuff
Originally Posted by D Grade
Any vacuum line that's post throttle body with work. Pick one, hook a vacuum port to it, and run all your sources off the vacuum port.
0.5 BAR
Joined: Sep 2007
Posts: 137
Re: vacum sources for turbo stuff
Originally Posted by jagojon3
Yea I wouldn't run them all off of one source. Each item you connect to a source reduces the vacuum/pressure it provides, so your BOV or (whatever else) might not function as designed.
I guess you covered it in the last post. :1 Eh, it's almost midnight. Shoulda been in bed hours ago.
3.0 BAR
Joined: Jul 2004
Posts: 4,027
Re: vacum sources for turbo stuff
Originally Posted by 93hatchturbo
On a vac manifold.... wheres the best place to get vac to supply it?
Thread
Thread Starter
Forum
Replies
Last Post
89b16hatch
Hybrid/Tech
11
Aug 14, 2006 07:44 PM
