HomemadeTurbo - DIY Turbo Forum
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Update - got dyno tuned again (https://www.homemadeturbo.com/forced-induction-7/update-got-dyno-tuned-again-21206/)

sohcrxsi 06-08-2004 09:01 PM
Re:Updated - My setup and result - Pictures Added
 
that bend on the downpipe right off the turbo looks harsh, maybe its just me

StanB 06-08-2004 09:11 PM
Re:Updated - My setup and result - Pictures Added
 
Originally Posted by sohcrxsi
that bend on the downpipe right off the turbo looks harsh, maybe its just me
It's the angle the picture was taken from. This down pipe came off a Saab. If you've seen one on a Saab you'll know it is not a harsh bend.

crxrx7 06-08-2004 11:23 PM
Re:Updated - My setup and result - Pictures Added
 
Did your injector clips snap right on without and modification to the clip? Cuz I have the same engine in my crx with the z6 clips and I couldn't get them on when I tested them.

Owned 06-09-2004 12:06 AM
Re:Updated - My setup and result - Pictures Added
 
that doesn't look like a Cx/hf manifold? ???

Turbo90Accord4DR 06-09-2004 12:19 AM
Re:Updated - My setup and result - Pictures Added
 
actually i think thats a vx manifold that has been choped off and welded a t3 flange, thats a smart idea. i did the same thing long time ago.

djfob 06-09-2004 01:03 AM
Re:Updated - My setup and result - Pictures Added
 
Originally Posted by crxrx7
Did your injector clips snap right on without and modification to the clip? Cuz I have the same engine in my crx with the z6 clips and I couldn't get them on when I tested them.
You have to notch out the tab on the z6 clips for them to fit. A small chisel or dremel would work.

StanB 06-09-2004 05:29 AM
Re:Updated - My setup and result - Pictures Added
 
Originally Posted by crxrx7
Did your injector clips snap right on without and modification to the clip? Cuz I have the same engine in my crx with the z6 clips and I couldn't get them on when I tested them.
Inside the top of each DSM injector is a little plastic ridge that you have to cut out. Just us a thin blade knife. Once the ridge is removed the clip will snap on with ease.

StanB 06-09-2004 05:34 AM
Re:Updated - My setup and result - Pictures Added
 
Originally Posted by Owned
that doesn't look like a Cx/hf manifold? ???
It came off a 1996 Civic CX. This manifold came with the catalytic converter attached to it. All i did was cut off the cat and weld a T3 flange to it.

brax90si 06-09-2004 12:06 PM
Re:Updated - My setup and result - Pictures Added
 
yeah i have one of those right now the manifold, mine came of a 97 civic hx, they are perfect for turbo manifold.

chingro4u 06-11-2004 08:00 AM
Re:Updated - My setup and result - Pictures Added
 
Jamaican ;D ;D ;D ;D ;D ;D ;D ;D

(flag hangin on rear view mirror)


All times are GMT -5. The time now is 05:05 PM.
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands