emery

okay, so my annoying as ---- tubro project on my Eclipse GTS will be finished tomorrow, but the only thing i dont know how to do is where to get the vacuum hose from my air manifold past the throttle body. my question is, is there a vacuum hose i can tee of and use that or do i have to tap my own? i did search but couldnt find any answers, i have aluminum brazing rods and a couple torches, but dont wanna take it off, may just JB weld? any tips are appreciated, here is my setup, cold side at least. water-to-air intercooler b1tchezzz



IS THIS THE VACUUM HOSE I AM LOOKING FOR

turbof22a

i dont understand your question. if you are talking about what line to tee off of for your bov then you can use any one you want. and what is the orange ---- on your intercooler

5G_4G15

i T'd the fuel pressure regulator on mine. look sick btw Mitsubishi ftmfw! what are you doing for fuel management? injectors?

emery

that orange ---- is silicon sealant, because originally the intercooler had the inlet and outlet facing the same direction and that is not acceptable.

stock in injectors right now.... im using the tactrix cable for fuel management. and probably some tolulene if im getting knocks, but starting at 4 psi, so no worries

turbof22a

so your using silicone sealant to hold the intercooler together? if you are its going to blow very quickly if your gonna be that ghetto at least get some jb weld that will hold.

emery

if it blows i will, but im only starting at 4 psi.. if i get above 12 ill probably have someone mig/tig weld it, i only got an arc welder

Atreidies

Good times...