type RS BOV, vacuum hose? & 2003 Eclipse GTS-T
okay, so my annoying as ---- tubro project on my Eclipse GTS will be finished tomorrow, but the only thing i dont know how to do is where to get the vacuum hose from my air manifold past the throttle body. my question is, is there a vacuum hose i can tee of and use that or do i have to tap my own? i did search but couldnt find any answers, i have aluminum brazing rods and a couple torches, but dont wanna take it off, may just JB weld? any tips are appreciated, here is my setup, cold side at least. water-to-air intercooler b1tchezzz http://i48.tinypic.com/kd28p0.jpg
IS THIS THE VACUUM HOSE I AM LOOKING FOR??? http://i50.tinypic.com/ftniqb.jpg |
i dont understand your question. if you are talking about what line to tee off of for your bov then you can use any one you want. and what is the orange ---- on your intercooler
|
i T'd the fuel pressure regulator on mine. look sick btw Mitsubishi ftmfw! what are you doing for fuel management? injectors?
|
that orange ---- is silicon sealant, because originally the intercooler had the inlet and outlet facing the same direction and that is not acceptable.
stock in injectors right now.... im using the tactrix cable for fuel management. and probably some tolulene if im getting knocks, but starting at 4 psi, so no worries |
so your using silicone sealant to hold the intercooler together? if you are its going to blow very quickly if your gonna be that ghetto at least get some jb weld that will hold.
|
if it blows i will, but im only starting at 4 psi.. if i get above 12 ill probably have someone mig/tig weld it, i only got an arc welder
|
Good times...
|
All times are GMT -5. The time now is 04:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands